Send Email
Send SMS
Search
Nano Scientific Research Centre Pvt Ltd
Nano Scientific Research Centre Pvt Ltd


EMBEDDED SYSTEMS TRAINING

Nano Scientific Research Centre Pvt Ltd.,(AN ISO 9001 : 2008 CERTIFIED COMPANY)

Nano Scientific Research Center pvt ltd., is invloved in the design and development of electronic based systems and we do extensive research in dsp based embedded solutions for telecom,mobile applications & consumer electronics.we do offer

  • INDUSTRAIAL SERVICES
  • CORPORATE TRAINING
  • STUDENT TRAINING
  • ACADEMIC PROJECTS

Our trainers/developers have years of experience in teaching/training.Each of them have higher professional university degree and specializations.Students find that our instructors are well informed about the current technological developments,who don't restrict their knowledge imparting process with in the curriculum.



Advanced Embedded Systems Training

REQUEST CALLBACK

Advanced Embedded Systems Training
Approx. Rs 30,000 / student
Get Best Quote

advanced diploma in embedded system
  • advance c/c++
  • basic embedded system
  • micro controllers
  1. 8051
  2. arm7
  3. aurdino
  • linux internals & device drivers
  1. linux basic programming
  2. linux system programming
  3. linux device drivers programming
  4. linux network programming
  5. rtos
  6. arm9/arm11-linux programming
  7. qt creator
  8. opencv

moq- 1 -student

 

 


  • Minimum Order Quantity: 1 student
  • Yes! I am interested

    8051-Micro Controller Training

    REQUEST CALLBACK

    8051-Micro Controller Training
    Approx. Rs 6,500 / student
    Get Best Quote

    Introduction to Embedded systems
    • What is Embedded System?

    • Types of Embedded System

    • Classifications of Embedded Systems

    • Characteristics of an Embedded System

    • Applications of embedded system

    8051 (8-bit)microcontroller Architecture & Programming

    • Block diagram and Pin description

    • Ports

    • Timers

    • Serial communication

    • Interrupts

    Lab Sessions:

    Session 1: Software Introduction (Keil Micro vision),Projection Creation
    Session 2: Port programming
    Session 3: Timer programming
    Session 4: Serial CommunicationSession 5: Interrupts
    Session 6: Practice

    89S52 interfacing with

     

     

    Session 1: Pcb Express Tool

    Session 2: Seven segment display

    Session 3: LED’s

    Session 4: LCD (16*2)
    Session 5: Keypad(4*4)
    Session 6: LCD &Keypad
    Session 7 : Keypad & Serial
    Session 8 : ADC(0809)
    Session 9 : DC Motor
    Session 10 : Stepper Motor
    Session 11: Relay

     

    89S52 Interfacing with Modules

    Different Types of Modules, Features of Different Modules, Uses of Different Modules interface

     

    Session 1.RFID

    Session 2.GSM

    Session 3.GPS

     

    Session 4: Zigbee

    Session 5: Finger print

    Session 6: Voice Module

     

    Practical Projects:

    1. RFID and Keypad based ATM security.

    2. GSM based electrical Device Control.

    3. GPS Data Logger

    4. Zigbee based wireless data communication syatem.

    5. GSM & GPS based Vechile Tracking

    6. RFID based time and Attendence

     

  • Minimum Order Quantity: 1 student
  • Yes! I am interested

    Advance C Training

    REQUEST CALLBACK

    Advance C  Training
    Approx. Rs 6,500 / student
    Get Best Quote

    Advanced C:

    Introduction

    What is a program, what is a programming language, Evolution of c language, Features of C, Structure of a C program, Compilation and execution.

    Words and sentences in c language

    Alphabets in c, keywords in c, constants, variables, data types, Comments in c, Format strings, escape sequences, Basic I/O instructions

    Operators:

    What is an operator

    Classification of operators

    1. No: of operands

    • Unary operators

    • Binary operators

    • Ternary operators

    1. Type of operation

    • arithmetic operators

    • relational operators

    • logical operators

    • assignment operators

    • inc/dec operators

    • bitwise operators

    • conditional operator

    • other operators

    Flow control instructions

    Decision Control Instructions

    • If, if-else, if-else-if, nested if-else

    Loop control instructions

    • for loop, while loop, do while, use of break and continue

    Selection instructions

    • switch

    Functions

    • What is a function, advantages of functions,

    • Components of function – declaration, call and definition of a function.

    • Parameters or arguments to a function, return values, call by value, recursion.

    Arrays:

    • what is an array, array declaration, array initialization, accessing individual elements of an array

    • Two dimensional arrays

    • passing an array element to a function

    • passing entire array to a function,

    Pointers:

    • What is a pointer, declaring a pointer variable, initializing a pointer variable,

    • Anonymous accessing

    • Pointer arithmetic

    • Pointers and arrays

    • Dynamic memory allocation

    • Pointers and functions, call by address, returning multiple values from a function

    • Function pointers.

    Strings:

    What are strings, string I/O, string manipulation functions- strlen, strcmp, strcpy, strcat,

    Structures and Unions:

    • Structure definition, declaring and accessing structure variables,

    • Structures and arrays

    • Structures and functions

    • Structures and pointers

    • Uses of structures

    • Unions, differences between structures and unions

    Storage classes and scoping:

    Automatic, register, external, static, scope of a variable

    Files:

    • Use of files, binary files, text files, file modes

    • file open, read/ write, close operations

    • character I/O, string I/O, integer I/O

    • formatted I/O – fprintf(), fscanf()

    • block I/O – fread(), fwrite()

    Other Features:

    • Variable no:of arguments – Functions with variable no: of arguments like printf, scanf,…,

    • Command line arguments – Passing arguments to main( ) function

    Preprocessor:

    • Preprocessor directives, simple macros, macros with arguments, macros Vs functions

    • File inclusion

    • Conditional compilation

    • #pragma directives


    Our unique Features :

    Project Training Session Are Conducted By Real-time Instructor With Real-time Examples.
    Best Project Materials .
    State-of-the-art Lab With Required Software For Practicing.

    MOQ--1 one
  • Minimum Order Quantity: 1 student
  • Yes! I am interested

    ARM 7 Training

    REQUEST CALLBACK

    ARM 7 Training
    Approx. Rs 10,000 / student
    Get Best Quote

     

    ARM (32-bit) Processor Architecture & Programming:

    Introduction to ARM7

    • Introduction to ARM family

    • LPC2148 features

    • block diagram and pin description

    • register set

    • Ports

    • Timers

    • Serial communication

    • Interrupts

    Lab Sessions:

    Session 1: Software Introduction (Keil Micro vision)

    Session 2: Port programming

    Session 3: Timer programming

    Session 4: Serial Communication

    Session 5: Interrupts

    Session 6: Practice

    LPC2148 interfacing with Modules

     

    Session 1: Seven segment display

    Session 2: LED’s

    Session 3: LCD (16*2)

    Session 4: Keypad (4*4)

    Session 5: LCD &Keypad

    Session 6: Keypad& Serial

    Session 7: ADC(0809)

    Session 8: DC Motor

    Session 9: Stepper Motor

    Session10:Relay

     

    LPC2148: Interfacing with Modules

    Different Types of Modules, Features of Different Modules, Uses of Different Modules interface

    Session 1.RFID

    Session 2.GSM

    Session 3.GPS

    Session 4.ZIGBEE

    Session 5:Finger print

    Session 6: Voice Module

    Yes! I am interested

    Embedded Linux Internals & Device Drivers

    REQUEST CALLBACK

    Embedded Linux Internals & Device Drivers
    Approx. Rs 12,000 / student
    Get Best Quote

    LINUX OPERATING SYSTEM:
    Operating Systems
    • Introduction
    • Processes
    • Threads
    • CPU Scheduling
    • Process Synchronization
    • Deadlocks
    • Memory management
    • Virtual Memory.
    • File management & Disk management
    Linux Basic Commands
    Linux System programming
    • Program, Process, Process IDs,
    • Processes Priorities, Process States, CPU Scheduling
    • Process Management API – fork, vfork, exec, wait and exit.
    • Zombie and Orphan Process
    • Pthread Programming and Thread Attributes
    • Process Synchronization Techniques.
    • Semaphores, Mutex, Spinlock, Memory Barriers
    • Inter Process Communication Techniques
    • Pipe, FIFO, Signals, Shared Memory
    • Timer API – Jiffies, kernel Timers, wait queues, sleeps
    • Interrupt and Exception API – Task lets, Work queues
    • Kernel Debugging – kgdb, printk, jprobs, kprobs
    Linux Device Drivers Programming
    • Introduction to Device Drivers
    • Device Number, Major and Minor Numbers
    • Inbuilt and Modular Drivers
    • User Space and Kernel Space Communication.
    • dev directory and device files
    • Character, Block and Network Driver.
    • Advanced Driver API – fcntl,ioctl
    • Unified Device Model (udev)
    • Proc File System, sys file system.
    • usbfs file system.
    • Character Device Driver Programming
    • Block Device Driver Programming
    • Serial Port Driver Programming
    • Parallel Port Driver Programming
    • USB Device Driver Programming
    • Network (Ethernet) Driver Programming
    • Flash Drive Driver Programming
    Linux Network Programming
    • Networking Architecture in Linux.
    • TCP/IP defector model and layer in kernel.
    • Client – Server Programming API.
    • TCP, UDP, RAW, UNIX, FTP, TFTP
    • VOIP Protocol Programming.
    • Arithmetic Server, Concurrent Server.
    • Broadcast Server Programming
    • Wireless Architecture and Programming
    Real -Time Operating System Programming
    • Real Time Concept, RTLinux Installation.
    • Scheduling and Preemption Programming.
    • GPOS and RTOS API Programming.
    • FIFO and Round Robin Scheduling Programming
    • Task Management, synchronization, Intertask Communication
    • Timers, Interrupt API in RTOs.
    • Signals, Events handling API in RTOs.
    • Priority Inversion/Inheritance.
    ARM 9/ARM11– Linux Programming

    • ARM Architecture and ARM Processor family.
    • ARM Development Boards and features.
    • Raspberry Pi Development Board.
    • Boot loader Configuration and Compilation for ARM
    • Kernel Configuration and Compilation for ARM.
    • File System Configuration and Compilation for ARM.
    • Porting Linux on Development Boards.
    • DNW Tools.
    QT CREATOR-OPENCV-ARM9/ARM11

    • Installing QT Framework.
    • Installing Opencv and Pocket Sphinx.
    • Application Development Using QT Creator.
    • Sensors and modules Programming in QT Creator.
    • Wireless Protocol Programming in QT Creator.
    • Image and Video Processing
    • Audio Processing
    • Opencv with QT Creator.
    • Pocket Sphinx with QT Creator.
    • Setting Cross Compiler
    • Executing Cross Compiled project file on ARM Board.


  • Minimum Order Quantity: 1 student
  • Yes! I am interested

    PCB Designing Training

    REQUEST CALLBACK

    PCB Designing Training
    Approx. Rs 6,500 / Unit
    Get Best Quote

    The PCB Designing Course Includes:

    1. Introduction of PCB

    2. Advantages of PCB

    3. Schematics Creation:--

    1.  
      1.  
        • Starting a project

        • Basics used for operating design tool

        • Component Selection from Libraries to circuit design

        • Placing, Editing & connecting Components for Ckt design ( Th, SMD)

        • Top---down & Down --- top Circuit check list .

        • Multiple peaces and interconnetions of schematics.

        • Component creation for over own Liberaries.

        • Exporting and importing Schematic data.

    1. Pad’s Design:--

    •  
      1.  
        • Importing PCB

        • Foot print Generation & Package selection Component check based on requirement.

        • Components placing

        • Detailes of Routing tracks and adjustments by Layers

        • Layout Creation & components connection --Through hole, SMD

        • Design rules check (DRC) Checking

        • Pad / pattern Editors creation for over own Liberaries

        • Final PCB Board Creator

    1. Reference component names / Adding Reference Texts silk screen prints on PCB.

    2. PCB manufacturing rules:

    •  
      1.  
        • Tracks , PAD’s , Hole width and design rules

        • Gerber file generation for manufacturing

     

     

     

     

     

    Knowledge on Symbols:--

    SMD Through Hole

    Resistors (Sizes/ Watt’s…..) Resistors (Sizes/Watt’s…)

    Capacitors (Sizes…) Capacitors (Sizes…)

    IC’s ( Sizes…) IC’s ( Sizes…)

    Component Editors using Data sheet (Through hole, SMD)

    Component calling / Connecting

    Pattern Editors using Data sheet (Through hole, SMD)

    Board’s quality based on copper pour

     

     

     

  • Minimum Order Quantity: 1 Unit
  • Yes! I am interested

    Robotics Training

    REQUEST CALLBACK

    Robotics Training
    Approx. Rs 6,500
    Get Best Quote

    OBJECTIVES:
    • To understand the basic concepts associated with the design and functioning and applications of Robots To study about the drives and sensors used in Robots
    • To learn about analyzing robot kinematics and robot programming

    FUNDAMENTALS OF ROBOT
    Robot – Definition – Robot Anatomy – Co-ordinate Systems, Work Envelope, types and classification – Specifications – Pitch, Yaw, Roll, Joint Notations, Speed of Motion, Pay Load – Robot Parts and Functions – Need for Robots – Different Applications

    ROBOT DRIVE SYSTEMS AND END EFFECTORS 10
    Pneumatic Drives – Hydraulic Drives – Mechanical Drives – Electrical Drives – D.C. Servo Motors, Stepper Motor, A.C. Servo Motors – Salient Features, Applications and Comparison of Drives End Effectors – Grippers – Mechanical Grippers, Pneumatic and Hydraulic Grippers, Magnetic Grippers, Vacuum Grippers; Two Fingered and Three Fingered Grippers; Internal Grippers and External Grippers; Selection and Design Considerations

    SENSORS AND MACHINE VISION 10
    Requirements of a sensor, Principles and Applications of the following types of sensors – Position of sensors (Piezo Electric Sensor, LVDT, Resolvers, Optical Encoders, Pneumatic Position Sensors), Range Sensors (Triangulation Principle, Structured, Lighting Approach, Time of Flight Range Finders, Laser Range Meters), Proximity Sensors (Inductive, Hall Effect, Capacitive, Ultrasonic and Optical Proximity Sensors), Touch Sensors, (Binary Sensors, Analog Sensors), Wrist Sensors, Compliance Sensors, Slip Sensors. Camera, Frame Grabber, Sensing and Digitizing Image Data – Signal Conversion, Image Storage, Lighting Techniques. Image Processing and Analysis – Data Reduction: Edge detection, Segmentation Feature Extraction and Object Recognition - Algorithms. Applications – Inspection, Identification, Visual Serving and Navigation.

    ROBOT KINEMATICS AND ROBOT PROGRAMMING 10
    Forward Kinematics, Inverse Kinematics and Differences; Forward Kinematics and Reverse Kinematics of Manipulators with Two, Three Degrees of Freedom (In 2 Dimensional), Four Degrees of Freedom (In 3 Dimensional) – Deviations and Problems. Teach Pendant Programming, Lead through programming, Robot programming Languages – VAL Programming – Motion Commands, Sensor Commands, End effecter commands, and Simple programs

    MOQ: 1 student
    Yes! I am interested

    Embedded IEEE Projects Mtech & Btech 2017

    REQUEST CALLBACK

    Embedded IEEE Projects Mtech & Btech  2017
    Approx. Rs 8,000 / Person
    Get Best Quote

    M-Tech IEEE EMBEDDED SYSTEMS Projects List 2016-17

     

    ARM PROCESSOR(9/11/CORTEX)

    For more Projects papers plz contact us Mallikarjun - 8297578555

     

    EM01

    Efficient Storage of Multi-Sensor Object-Tracking Data(2016)

     

    EM02

    An Internet-of-Things Enabled Connected Navigation System for Urban Bus Riders(2016)

     

    EM03

    Local-Gravity-Face (LG-face) for Illumination-Invariant and Heterogeneous Face Recognition(2016)

     

    EM04

    SteganoPIN: Two-Faced Human–Machine Interface for Practical Enforcement of PIN Entry Security(2016)

     

    EM05

    Energy-Centered and QoS-Aware Services Selection for Internet of Things(2016)

     

    EM06

    Air-Writing Recognition—Part I: Modelling and Recognition of Characters, Words, and Connecting Motions(2016)

     

    EM07

    Intelligent Device-to-Device Communication in the Internet of Things(2016)

     

    EM08

    Selective gray-coded bit-plane based low-complexity motion estimation and its hardware architecture(2016)

     

    EM09

    Reversible Data Hiding in Encrypted Images by Reversible Image Transformation(2016)

     

    EM10

    A General Real-Time Control Approach of Intrusion Response for Industrial Automation Systems(2016)

     

    EM11

    Evaluation of Key-point Descriptors Applied in the Pedestrian Detection in Low Quality Images(2016)

     

    EM12

    Real-Time SURF-Based Video Stabilization System for an FPGA-Driven Mobile Robot(2016)

     

    EM13

    Low-Power Wearable ECG Monitoring System for Multiple-Patient Remote Monitoring(2016)

     

    EM14

    Internet of Things Session Management Over LTE—Balancing Signal Load, Power, and Delay(2016)

     

     

     

  • Minimum Order Quantity: 1 Person
  • Yes! I am interested

     
    X


    Call Us:  +91-8071803116
    Nano Scientific Research Centre Pvt Ltd
    K. Aravind Reddy (Business Director)
    4 & 6th Floor, Siri Estates, Opposite To Karur Vysya Bank, Opposite Lane To R. S. Brothers Ameerpet,
    Hyderabad - 500073, Telangana, India
    Contact via E-mail
    Contact via SMS



    Home  |   Profile   |  Our Services  |  Site Map  |   Contact Us   |   Mobile Site

    © Nano Scientific Research Centre Pvt Ltd. All Rights Reserved (Terms of Use)
    Developed and Managed by IndiaMART InterMESH Limited

    Nano Scientific Research Centre Pvt Ltd