Send Email
Send SMS
Search
Nano Scientific Research Centre Pvt Ltd
Nano Scientific Research Centre Pvt Ltd


EMBEDDED SYSTEM IEEE PROJECTS

Nano Scientific Research Centre Pvt Ltd.,(AN ISO 9001 : 2008 CERTIFIED COMPANY)
LIST:

Automated Health Alerts Using In-home Sensor Data

REQUEST CALLBACK

Automated Health Alerts Using In-home Sensor Data
Approx. Rs 10,000 / Piece
Get Best Quote

Automated Health Alerts Using In-Home Sensor Data for Embedded Health Assessment

AIM:
The main objective of the project is to design “Automated health alerts using in-home sensor data for embedded health assessment”.
PROPOSED:
In the proposed system, we propose the interest and potential of embedded health assessment. Both day and night time activity has been investigated using in-home sensors. Microwave Radar Sensor (MWR) motion sensors have been used to capture speed of motion in a particular location in the home. The pattern of room to room activity has been studied as a means of investigating health changes by using ARM Processor.
The camera has been captured the state of the patient and send to the ARM processor. High speed ARM processor we are using for processing the data. It can process the data which is coming from camera and MWR sensor with high accuracy and send to the particular mail from registered mail ID, Web portal and Mobile. Web is the thing where we can monitor our data from anywhere in the world by typing the IP addresses in web page and also by checking mail ID we can check the status of patient.
It will take less time to check patient conditions. We can monitor number of times with less afford from anywhere through the web.
SOFTWARES USED:
For implementing this project we are using following…
1. LINUX OPERATING SYSTEM
The Linux open source operating system, or Linux OS, is a freely distributable, cross-platform operating system based on Unix that can be installed on PCs, laptops, net books, mobile and tablet devices, video game consoles, servers, supercomputers and more.
2. QT FOR EMBEDDED LINUX
Qt for Embedded Linux is a C++ framework for GUI and application development for embedded devices. It runs on a variety of processors, usually with Embedded Linux. Qt for Embedded Linux provides the standard Qt API for embedded devices with a lightweight window system.
TECHNOLOGIES:
• Telecommunication
• TCP/IP Protocol
• OpenCV
ADVANTAGES:
• Low cost and easy to implement.
• Easy to monitor the health form IOT.
APLLICATIONS:
• Medical applications.
REFERENCE:
1. Datasheets and the user manuals of ARM controller.
2. Beginning of Linux programming by Neil Matthew, Richard Stones.

  • Minimum Order Quantity: 1 Piece
  • Yes! I am interested

    A Blind Zone Alert System Based on Intra

    REQUEST CALLBACK

    A Blind Zone Alert System Based on Intra
    Approx. Rs 10,000 / Piece
    Get Best Quote

    A Blind Zone Alert System Based on Intra
    OBJECTIVE:
    The main aim of the project is to “A Blind Zone Alert System Based on Intra-Vehicular Wireless Sensor Networks”.
    Existing method:
    Due to the increasing number of sensors deployed in modern vehicles, intra-vehicular wireless sensor networks (IVWSNs) have recently received a lot of attention in the auto-motive industry, as they can reduce the amount of wiring harness inside a vehicle. By removing the wires, car manufacturers can reduce the weight of a vehicle and improve engine performance, fuel economy, and reliability.
    Proposed Method:
    To the existing system, sometime sensor not give accurate values depending upon the variation in temperature and abnormal variation in the nature, to overcome this problem, we are coming with an idea of adding cameras, which monitors the blind zone of the vehicle and displays on mirror in front of driver, these images can be monitored through phone and laptop using WSN. This modification had proved more efficient when compared with sensors and can be more effective in sharp turns and intersections.
    SOFTWARES USED:
    For implementing this project we are using Linux, Qt for embedded Linux.
    1. LINUX OPERATING SYSTEM (UBUNTU)
    2. QT CREATOR
    3. APLLICATION LANGUAGE C / C++
    Technologies:
    HTTP
    IOT
    I2C
    ADVANTAGES:
    Easy to implement and low power consumption .
    Easley find out the disconnected modules connected to ARM on run time.
    Less time for trouble shooting
    less cost
    APPLICATIONS:
    Agriculture
    Industries
    Home, Shopping malls.
    REFERENCE:
    1. Datasheets and the user manuals of ARM controller.
    2. Beginning of Linux programming by Neil Matthew, Richard Stones.
  • Minimum Order Quantity: 1 Piece
  • Yes! I am interested

    A Method for Detecting Abnormal Program Behavior on Embedded

    REQUEST CALLBACK

    A Method for Detecting Abnormal Program Behavior on Embedded
    Approx. Rs 10,000 / Piece
    Get Best Quote

    A Method for Detecting Abnormal Program Behavior on Embedded Devices

    OBJECTIVE:
    The main aim of the project is to “A Method of Detecting Abnormal Program Behavior on Embedded Devices”.
    Existing method:
    In existing system nodes sending information to target device will be common factor in industries but we don't know weather nodes sending correct information or garbage values or previous values immediately to rectify the situation. To overcome this problem we are implementing the proposed method.
    Proposed Method:
    In this proposed method, we are using an advanced open source ARM32 bit microprocessor which is having advanced features support to complete our task. In order to overcome the disadvantage in existing method we are implementing the concept to get the proper information about the status of the modules (Memory Unit and Nodes unit) weather active or inactive stages in runtime to take an immediate action. In general run time modules information up-gradation can be accessible in control panel. In case of runtime devices disconnection we will get an recently updated information or garbage information for the control unit, where they need more response time to identify the updated info will proper or not. In order to reduce troubleshooting time on run time module issues these concept will provide a solution. Nodes unit data will be store on memory unit for any accuracy comparison between time period and the total data will be updated lively on webserver through IP(Internet Protocol) Address.
    SOFTWARES USED:
    For implementing this project we are using Linux, Qt for embedded Linux.
    1. LINUX OPERATING SYSTEM (UBUNTU)
    2. QT CREATOR
    3. APLLICATION LANGUAGE C / C++
    Technologies:
    HTTP
    IOT
    I2C
    ADVANTAGES:
    Easy to implement and low power consumption .
    Easley find out the disconnected modules connected to ARM on run time.
    Less time for trouble shooting
    less cost
    APPLICATIONS:
    Agriculture
    Industries
    Home, Shopping malls.
    REFERENCE:
    1. Datasheets and the user manuals of ARM controller.
    2. Beginning of Linux programming by Neil Matthew, Richard Stones.

  • Minimum Order Quantity: 1 Piece
  • Yes! I am interested

    Implementation Of A New Lightweight Encryption Design

    REQUEST CALLBACK

    Implementation Of A New Lightweight Encryption Design
    Approx. Rs 10,000 / Piece
    Get Best Quote

    Implementation of a New Lightweight Encryption Design for Embedded Security
  • Minimum Order Quantity: 1 Piece
  • Yes! I am interested

    Multi-task Pose-invariant Face Recognition

    REQUEST CALLBACK

    Multi-task Pose-invariant Face Recognition
    Approx. Rs 10,000 / Piece(s)
    Get Best Quote

    Multi-task Pose-Invariant Face Recognition
    AIM: The main objective of the project is to design “Multi-task Pose-Invariant Face Recognition”.
    EXISTING METHOD:
    In the existing system by using cameras monitoring should be done continuously in the control room. To recognize a particular person/victim among the crowd by the person inside the control is not possible to identify and the chances of identifying the person is very less which is not accurate. So, in order to identify the particular person/victim continues monitoring is required without any interrupt.
    PROPOSED METHOD:
    The proposed system is designed to identify the features of the person based on the images stored inside controller. This system takes capture image by means of web camera connected to ARM microcontroller through USB and the image is processed by using image processing technique. Image processing is any form of signal processing for which the input is an image, such as a photograph or video frame.The output of image processing may be either an image or a set of characteristics or parameters related to the image. In our system we can store our own images by using train key and after storing the images we can identify person in photos when camera captures person in photos comes in front of camera.
    SOFTWARES USED:
    For implementing this project we are using Linux, Qt for embedded Linux and open CV library.

    1. LINUX OPERATING SYSTEM
    The Linux open source operating system, or Linux OS, is a freely distributable, cross-platform operating system based on Unix that can be installed on PCs, laptops, net books, mobile and tablet devices, video game consoles, servers, supercomputers and more.

    2. Qt for Embedded Linux
    Qt for Embedded Linux is a C++ framework for GUI and application development for embedded devices. It runs on a variety of processors, usually with Embedded Linux. Qt for Embedded Linux provides the standard Qt API for embedded devices with a lightweight window system.

    3. OPEN CV
    Open CV is an open source computer vision library originally developed by Intel. It is free for commercial and research use under a BSD (Berkeley Software Distribution) license. The library is cross-platform, and runs on Linux, Windows and Mac OS X. It focuses mainly towards real-time image processing, as such, if it finds Intel's Integrated Performance Primitives on the system, it will use these commercial optimized routines to accelerate itself.
    4. APLLICATION LANGUAGE C / C++
    ADVANTAGES:
    It is used to provide the security.
    Automatic monitoring system.
    It avoids potential human errors.


    APPLICATIONS:
    It is used in corporate offices, Government offices, Schools, Colleges, etc.
    REFERENCE:
    1. Datasheets and the user manuals of ARM controller.
    2. Beginning of Linux programming by Neil Matthew, Richard Stones.
  • Minimum Order Quantity: 1 Piece(s)
  • Yes! I am interested

    Embedded Web Server For Real-time Remote Control And Monitor

    REQUEST CALLBACK

    Embedded Web Server For Real-time Remote Control And Monitor
    Approx. Rs 10,000 / Piece(s)
    Get Best Quote

    Embedded Web Server for Real-time Remote Control and Monitoring of an FPGA-based On-Board Computer System
    AIM:
    The main aim of the project is to design “Embedded Web Server for Real-time Remote Control and Monitoring of an FPGA-based On-Board Computer System”.
    INTRODUCTION
    A new generation of reconfigurable FPGA-based on-board computer (OBC) has experienced a rapid development in a wide range of applications that include upgrade capability (Space and automobile applications, medical field, industrial control system). This was accompanied by an increased need to monitor, maintain and update these systems. On the other hand, Web technology becomes widely used and there is an ascending trend to migrate everything online and to remotely control systems. In this regard, several studies have emerged suggesting the implementation of the embedded Web server technology to provide a monitor and control system based on an Internet browser and an embedded TCP/IP protocol suite.
    OBJECTIVE:
    In comparison with PC, the embedded system is greatly improved in stability, reliability and safety etc. The embedded system transplanted web server can be called embedded web server. Through web page posted by embedded web server, remote users can obtain the real-time status information and control remote equipment’s without time and space restriction. In this project the monitoring and controlling of devices is achieved using TCP/IP protocol and the Raspberry Pi. The TCP/IP protocol is the vital part, as it is used for the implementation of Embedded Web server.
    This project consists of two parts, a server module which is connected to internet through RJ45 interface and a sensor module which always reads values from the sensors and is published on the internet. So the user can monitor and control the devices through Browser.
    When the client types the correct IP address in the browser, the webpage displays the sensors values to the user and if there are any discrepancies in the values, then the user can control the device through a relay connected to the sensor module. Apart from controlling the devices remotely, automatic controlling procedure is also provided to control the devices.
    SOFTWARES USED:
    For implementing this project we are using Linux, Qt for embedded Linux.
    1. LINUX OPERATING SYSTEM
    The Linux open source operating system, or Linux OS, is a freely distributable, cross-platform operating system based on Unix that can be installed on PCs, laptops, net books, mobile and tablet devices, video game consoles, servers, supercomputers and more.
    2. Qt for Embedded Linux
    Qt for Embedded Linux is a C++ framework for GUI and application development for embedded devices. It runs on a variety of processors, usually with Embedded Linux. Qt for Embedded Linux provides the standard Qt API for embedded devices with a lightweight window system.
    3. APLLICATION LANGUAGE C / C++
    ADVANTAGES:
    High quality.
    Low cost, easy to implement.
    APPLICATIONS:
    For security purpose
    REFERENCE:
    1. Datasheets and the user manuals of ARM controller.
    2. Beginning of Linux programming by Neil Matthew, Richard Stones.
  • Minimum Order Quantity: 1 Piece(s)
  • Yes! I am interested

    A Genetic Algorithm-Based Moving Object Detection

    REQUEST CALLBACK

    A Genetic Algorithm-Based Moving Object Detection
    Approx. Rs 10,000 / Piece(s)
    Get Best Quote

    A Genetic Algorithm-Based Moving Object Detection for Real-time Traffic Surveillance
    INTRODUCTION:
    The large increase of the vehicles is making the roads full results in lot of traffic jam and it becoming more critical day by day. So, the detection to vehicles is of great importance. Video tracking system is the most popular way of detection due to its enormous advantage. It uses the fixed and still camera for continuous surveillance, deals and analyses the picked serial pictures and frame, in order to Identify and track the moving object correctly. Automated visual surveillance is currently a hot topic in computer vision research. A common approach is to perform background subtraction, which identifies moving objects from the sequence of video frames that differs significantly from a background model. As a basic, the background image must be a representation of the scene with no moving objects and must be kept regularly updated. There are many challenges in developing a good background subtraction algorithm. Moving object detection techniques have been studied extensively for such purposes as video content analysis as well as remote surveillance. Traffic congestion monitoring is being more and important with the enlarging of urban scale and increasing number of vehicles. Video based traffic congestion monitoring systems are widely used now but it relies on the high performance of hardware.
    PROPOSED METHOD:
    In the proposed method, an intelligent vehicle detection method is used and is based on blob analysis in traffic surveillance. The algorithm is composed of moving object segmentation, blob analysis, and tracking. The algorithm is composed of moving object segmentation, blob analysis, and tracking. By analyzing the blob of vehicles, the meaningful features are extracted. In addition, the speed of each vehicle and the vehicle flow through a predefined area can be calculated by analyzing blobs of vehicles.
    In this project, we are implementing the system with a raspberry pi processor for processing the data, camera for capturing the detected objects in a video with the help of image processing techniques. And we can also calculate the speed of the moving object. Here, camera is placed on the roads for video Surveillance and from that video we are capturing the motion of the vehicles and processing the data with the help of processor and send it to control room for remote monitoring with the help of internet.
    SOFTWARES USED:
    For implementing this project we are using Linux, Qt for embedded Linux.
    1. LINUX OPERATING SYSTEM
    The Linux open source operating system, or Linux OS, is a freely distributable, cross-platform operating system based on Unix that can be installed on PCs, laptops, net books, mobile and tablet devices, video game consoles, servers, supercomputers and more.
    2. Qt for Embedded Linux
    Qt for Embedded Linux is a C++ framework for GUI and application development for embedded devices. It runs on a variety of processors, usually with Embedded Linux. Qt for Embedded Linux provides the standard Qt API for embedded devices with a lightweight window system.
    3. FTP:
    File Transfer Protocol (FTP) is a standard network protocol used to transfer files from one host to another host over a TCP-based network, such as the Internet.
    4. APLLICATION LANGUAGE C / C++
    ADVANTAGES:
    Low support cost, easy to implement and low power consumption and controlling is done by using web technology.
    APPLICATIONS:
    Transportation systems
    REFERENCE:
    1. Datasheets and the user manuals of ARM controller.
    2. Beginning of Linux programming by Neil Matthew, Richard Stones.
  • Minimum Order Quantity: 1 Piece(s)
  • Yes! I am interested

    Real Time Car Parking System Using Image Processing

    REQUEST CALLBACK

    Real Time Car Parking System Using Image Processing
    Approx. Rs 10,000 / Piece(s)
    Get Best Quote

    Real Time Car Parking System Using Image Processing
    AIM:
    The main objective of the project is to “Real Time Car Parking System Using Image Processing”.
    OBJCTIVE:
    In the proposed method, an intelligent vehicle parking method is used and is based on image processing in traffic surveillance of parking places. The algorithm is composed of object segmentation in parking place, image processing, and booking parking place through GSM.
    In this project, we are implementing the system with a ARM-9 processor for processing the data. Here camera is placing in front of the parking place. Camera has been capturing the detected objects in the parking place and sending to the processor. The camera also recognizes the person while driving the cars. The process maintains the data base of the objects in parking place and it share date through GSM module. If you keep request to the GSM it will send available slots in parking place. By sending the slot number we can book that particular slot for us. We can do parking in that particular slot which we has booked. Another person can’t book already registered slot.
    SOFTWARES USED:
    For implementing this project we are using Linux, Qt for embedded Linux.
    1. LINUX OPERATING SYSTEM
    The Linux open source operating system, or Linux OS, is a freely distributable, cross-platform operating system based on Unix that can be installed on PCs, laptops, net books, mobile and tablet devices, video game consoles, servers, supercomputers and more.
    2. Qt for Embedded Linux
    Qt for Embedded Linux is a C++ framework for GUI and application development for embedded devices. It runs on a variety of processors, usually with Embedded Linux. Qt for Embedded Linux provides the standard Qt API for embedded devices with a lightweight window system.
    3. APLLICATION LANGUAGE C / C++
    ADVANTAGES:
    Low support cost, easy to implement and low power consumption and controlling is done by using GSM technology.
    APPLICATIONS:
    Parking systems
    REFERENCE:
    1. Datasheets and the user manuals of ARM controller.
    2. Beginning of Linux programming by Neil Matthew, Richard Stones.
  • Minimum Order Quantity: 1 Piece(s)
  • Yes! I am interested

    Child Activity Recognition Based On Cooperative Fusion Model

    REQUEST CALLBACK

    Child Activity Recognition Based On Cooperative Fusion Model
    Approx. Rs 10,000 / Piece
    Get Best Quote

    Child Activity Recognition Based On Cooperative Fusion Model With Barometric Pressure Sensor
    AIM:
    The main objective of the project is to design “Child Activity Recognition Based On Cooperative Fusion Model With Barometric Pressure Sensor”.
    PROPOSED:
    This paper presents a child activity recognition approach using a barometric pressure sensor worn on a waist of the body to prevent child accidents such as unintentional injuries at home. Labeled data is collected from children of both sexes up to the age of 16 to 29 months. To recognize daily activities, mean, standard deviation, and slope of time-domain features are calculated over sliding windows.. Child activities are classified into 3 daily activities which are standing still, standing up, sitting down.
    This paper presents a child activity recognition approach using a barometric pressure sensor connect to waist of the body. Here we are using I2C module which has Temperature, Pressure and altitude sensors to measure the temperature, Pressure and altitude respectively. We are monitoring all sensors values on the display unit of the ARM-11 and on mobile also we can access through Wi-Fi.
    SOFTWARES USED:
    For implementing this project we are using following…
    1. LINUX OPERATING SYSTEM
    The Linux open source operating system, or Linux OS, is a freely distributable, cross-platform operating system based on Unix that can be installed on PCs, laptops, net books, mobile and tablet devices, video game consoles, servers, supercomputers and more.
    2. QT FOR EMBEDDED LINUX
    Qt for Embedded Linux is a C++ framework for GUI and application development for embedded devices. It runs on a variety of processors, usually with Embedded Linux. Qt for Embedded Linux provides the standard Qt API for embedded devices with a lightweight window system.
    TECHNOLOGIES:
    • Telecommunication
    • TCP/IP Protocol
    • I2C Protocol
    ADVANTAGES:
    • Low cost
    • Easy setup.
    APLLICATIONS:
    • Monitoring the children in remote location.
    REFERENCE:
    1. Datasheets and the user manuals of ARM controller.
    2. Beginning of Linux programming by Neil Matthew, Richard Stones.
  • Minimum Order Quantity: 1 Piece
  • Yes! I am interested

    Eye Tracking Based Driver Fatigue Monitoring

    REQUEST CALLBACK

    Eye Tracking Based Driver Fatigue Monitoring
    Approx. Rs 10,000 / Piece(s)
    Get Best Quote

    Eye Tracking based Driver Fatigue Monitoring and Warning System abstract
    AIM:
    The main objective of the project is to “Eye Tracking based Driver Fatigue Monitoring and Warning System”.

    INTRODUCTION:
    Eye tracking is the process of measuring either the point of gaze (where one is looking) or the motion of an eye relative to the head. An eye tracker is a device for measuring eye positions and eye movement. Eye trackers are used in research on the visual system, in psychology, in psycholinguistics, marketing, as an input device for human computer interaction, and in product design. There are a number of methods for measuring eye movement.

    PROPOSED SYSTEM:
    The main idea behind this project is to develop a non-intrusive system which can detect fatigue of the driver and issue a timely warning. Since a large number of road accidents occur due to the driver drowsiness. Hence this system will be helpful in preventing many accidents, and consequently save money and reduce personal suffering. This system will monitor the driver’s eyes using camera and by developing an algorithm we can detect symptoms of driver fatigue early enough to avoid accident. So this project will be helpful in detecting driver fatigue in advance and will gave warning output in form of sound. Moreover the warning will be deactivated manually rather than automatically. So for this purpose a deactivation switch will be used to deactivate warning.
    SOFTWARES USED:
    For implementing this project we are using Linux, Qt for embedded Linux and open CV library.

    • LINUX OPERATING SYSTEM
    The Linux open source operating system, or Linux OS, is a freely distributable, cross-platform operating system based on Unix that can be installed on PCs, laptops, net books, mobile and tablet devices, video game consoles, servers, supercomputers and more.

    • Qt for Embedded Linux
    Qt for Embedded Linux is a C++ framework for GUI and application development for embedded devices. It runs on a variety of processors, usually with Embedded Linux. Qt for Embedded Linux provides the standard Qt API for embedded devices with a lightweight window system.

    • OPEN CV
    Open CV is an open source computer vision library originally developed by Intel. It is free for commercial and research use under a BSD (Berkeley Software Distribution) license. The library is cross-platform, and runs on Linux, Windows and Mac OS X. It focuses mainly towards real-time image processing, as such, if it finds Intel's Integrated Performance Primitives on the system, it will use these commercial optimized routines to accelerate itself.

    • APLLICATION LANGUAGE C / C++

    ADVANTAGES:
    • Low cost, easy to implement.
    • Low power consumption.

    APPLICATIONS:
    • Used for providing security in automobile area.

    REFERENCE:
    1. Datasheets and the user manuals of ARM controller.
    2. Beginning of Linux programming by Neil Matthew, Richard Stones.
  • Minimum Order Quantity: 1 Piece(s)
  • Yes! I am interested

    Implementation Of Virtual Desktop Infrastructure In Academic

    REQUEST CALLBACK

    Implementation Of Virtual Desktop Infrastructure In Academic
    Approx. Rs 10,000 / Piece(s)
    Get Best Quote

    Implementation of Virtual Desktop Infrastructure in academic Laboratories
    AIM:
    The main aim of the project is to design “Implementation of Virtual Desktop Infrastructure in academic Laboratories”

    MOTIVATION:
    To design a Embedded Thin client, we need to use xserver both in PC and Raspberry Pi. Xserver (GUI) is used as interface between user and operating system. Xserver is used to control all actions generated by key board, mouse and gives indication to the system to perform the task. Example if we press any icon on the desktop using mouse then it raises event to operating system to perform certain action.
    OBJECTIVE:
    In the proposed system, desktop and raspberry Pi both are interfaced through LAN network where we can access the desktop using RDP protocol. RDP protocol is remote desktop protocol which is used to read frame buffer from remote desktop and allows displaying the received frame buffer on the monitor connected to Raspberry Pi. Now we can see the remote desktop on monitor connected to raspberry pi board. By using keyboard and mouse we can access desktop like opening web browser or entering data on note pad through key board etc.
    SOFTWARES USED:
    For implementing this project we are using following…
    1. LINUX OPERATING SYSTEM
    The Linux open source operating system, or Linux OS, is a freely distributable, cross-platform operating system based on Unix that can be installed on PCs, laptops, net books, mobile and tablet devices, video game consoles, servers, supercomputers and more.
    2. RDP Protocol:
    Remote Desktop Protocol (RDP) is a proprietary protocol developed by Microsoft, which provides a user with a graphical interface to connect to another computer over a network connection.
    3. RFB PROTOCOL:
    RFB (“remote frame buffer”) is a simple protocol for remote access to graphical user interfaces. Because it works at the frame buffer level it is applicable to all windowing systems and applications, including X11, Windows and Macintosh. RFB is the protocol used in Virtual Network Computing (VNC) and its derivatives.
    ADVANTAGES:
    • Low support cost, easy to implement and low power consumption and controlling is done by using LAN network.
    • Can control different systems one processor at remote location through LAN network.
    • High reliability and robust security.
    • Easy setup.
    APLLICATIONS:
    • At industries
    • At companies
    REFERENCE:
    1. Datasheets and the user manuals of ARM controller.
    2. Beginning of Linux programming by Neil Matthew, Richard Stones.
  • Minimum Order Quantity: 1 Piece(s)
  • Yes! I am interested

    Design Of A VoIP Media Stream Encryption Device Objective

    REQUEST CALLBACK

    Design Of A VoIP Media Stream Encryption Device Objective
    Approx. Rs 10,000 / Piece(s)
    Get Best Quote

    Design of a VoIP media stream encryption device OBJECTIVE
    AIM:
    The main objective of the project is to “Design of a VoIP media stream encryption device OBJECTIVE”.
    EXISTING METHOD:
    In early days the two devices can communicate through internet. The communication is in the form of text by typing it from keyboard. If the devices want to communicate through voice, we require PSTN. By using PSTN No free calls possible and installation of PSTN PBX requires extra wiring, expensive proprietary hardware. The main disadvantage of this system is we can communicate with other device by typing the text only. We cannot communicate through voice calls.
    PROPOSED METHOD:
    Our Embedded project is to design and develop a low cost feature which is based on embedded platform for VOIP media using ARM architecture. It has feature of image/video processing by using various features and classification algorithms and the product is to be used as VOIP media device communications platform for multiple applications areas.
    The design of a VoIP media stream encryption device e can be deployed between the VOICE OVER INTERNET PROTOCAL (VOIP) terminal, dedicatedly used for the encryption/de-encryption of the VoIP signal and the RTP (Real-time Control Protocol) voice packet. The encryption flow of the packet is described when the VoIP protocol is SIP (Session Initiation Protocol) and the encryption algorithm is RC4.
    Our embedded system is designed for transferring voice calls through Internet protocol by typing IP address on TFT display and this project is for low cost phone calls, which using SAMSUNG Corporation chips as core processor.
    BLOCK DIAGRAM:


    SOFTWARES USED:
    For implementing this project we are using Linux, Qt for embedded Linux.
    1. LINUX OPERATING SYSTEM
    The Linux open source operating system, or Linux OS, is a freely distributable, cross-platform operating system based on Unix that can be installed on PCs, laptops, net books, mobile and tablet devices, video game consoles, servers, supercomputers and more.
    2. Qt for Embedded Linux
    Qt for Embedded Linux is a C++ framework for GUI and application development for embedded devices. It runs on a variety of processors, usually with Embedded Linux. Qt for Embedded Linux provides the standard Qt API for embedded devices with a lightweight window system.
    3. APLLICATION LANGUAGE C / C++
    ADVANTAGES:
    The main advantage is the amount of money you end up saving on your phone bills as compared to a traditional phone line.
    Inexpensive and easy to use. Since it is simple, upgrading is relatively simpler too.
    You can integrate it with an existing phone connection.
    With VOIP PC-to-PC, calls are free no matter the distance.
    APPLICATIONS:
    Skype
    VoIP Buster
    MSN Messenger
    Gizmo
    Jajah
    Teleo
    Sharp Voice
    Web Phone
    pulver.Communicator
    REFERENCE:
    1. Datasheets and the user manuals of ARM controller.
    2. Beginning of Linux programming by Neil Matthew, Richard Stones.
  • Minimum Order Quantity: 1 Piece(s)
  • Yes! I am interested

    An Energy Efficient Hybrid FPGA-GPU Based Embedded Platform

    REQUEST CALLBACK

    An Energy Efficient Hybrid FPGA-GPU Based Embedded Platform
    Approx. Rs 10,000 / Piece(s)
    Get Best Quote

    An Energy Efficient Hybrid FPGA-GPU based Embedded Platform to Accelerate Face Recognition Application
    AIM:
    The main aim of this project is to design “An Energy Efficient Hybrid FPGA-GPU based Embedded Platform to Accelerate Face Recognition Application”.
    PROPOSED METHOD:
    In the proposed method we propose a power and energy efficient heterogeneous platform to accelerate face recognition applications. To achieve this efficiency, we propose a novel hybrid platform which consists of a Xilinx Zynq. In this application, we optimized local binary pattern and eigenvalue based face detection and recognition in order to achieve a speedup of 69x when compared to sequential execution on the ARM core, 4.8x against Zynq platform (ARM+FPGA).
    Here we are interfacing camera to Zynq processor. In training mode the processor stores person’s data in data base. In recognition mode camera will capture face image of a person and will be sent to Zynq processor. The processer will recognize the face of the particular person from the image which has been stored in the database. If the face is matched then it will display the data on display unit.
    BLOCK DIAGRAM:




    LINUX OPERATING SYSTEM
    The Linux open source operating system, or Linux OS, is a freely distributable, cross-platform operating system based on Unix that can be installed on PCs, laptops, net books, mobile and tablet devices, video game consoles, servers, supercomputers and more.

    • Qt for Embedded Linux
    Qt for Embedded Linux is a C++ framework for GUI and application development for embedded devices. It runs on a variety of processors, usually with Embedded Linux. Qt for Embedded Linux provides the standard Qt API for embedded devices with a lightweight window system.

    • OPEN CV
    Open CV is an open source computer vision library originally developed by Intel. It is free for commercial and research use under a BSD (Berkeley Software Distribution) license. The library is cross-platform, and runs on Linux, Windows and Mac OS X. It focuses mainly towards real-time image processing, as such, if it finds Intel's Integrated Performance Primitives on the system, it will use these commercial optimized routines to accelerate itself.

    • APLLICATION LANGUAGE C / C++

    ADVANTAGES:
    • Low cost, easy to implement.
    • Security
    • Low power consumption.

    APPLICATIONS:
    • Used for providing security.

    REFERENCE:
    1. Datasheets and the user manuals of Xilinx FPGA.
    2. Beginning of Linux programming by Neil Matthew, Richard Stones.
  • Minimum Order Quantity: 1 Piece(s)
  • Yes! I am interested

    Flexible And Reconfigurable System On Chip For WSN

    REQUEST CALLBACK

    Flexible And Reconfigurable System On Chip For WSN
    Approx. Rs 10,000 / Piece(s)
    Get Best Quote

    Flexible and reconfigurable system on chip for WSN
    AIM: The main objective of the project is to design “FLEXIBLE AND ECONFIGURABLE SYSTEM ON CHIP FOR WIRELESS SENSOR NETWORK
    ”.
    EXISTING METHOD:
    Automatic control panel are available in industries for monitoring and controlling the parameters of machines and hence final product. But most of the control panels in industries are wire panels and machines are controlled and monitor by the control room operator using wire network. The wires are moving through conducts, sometimes inside walls and sometimes underground also. So breakdown maintenance of these wires is difficult task in industries. As these wires are not open so it is difficult to locate the fault. And even after locating the fault it takes time to repair them. The second disadvantages of this method are operator console can not move from one room to another.
    PROPOSED METHOD:
    Technologies:
    Wireless sensor network:
    A wireless sensor network (WSN) of spatially distributed autonomous sensors to monitor physical or environmental conditions, such as temperature, LDR, Fire, etc. and to cooperatively pass their data through the network to a main location. The more modern networks are bi-directional, also enabling control of sensor activity. The development of wireless sensor networks was motivated by military applications such as battlefield surveillance; today such networks are used in many industrial and consumer applications, such as industrial process monitoring and control, machine health monitoring
    Implementation method:
    We are designing advanced embedded system by using wireless sensor network. We are designed a system by using ZYNQ and 8051 which supports different features and algorithms for the development of industrial automation systems. In these project we are using two systems for two-way communication, One system consist of Microcontroller-atlmel (89s52) is used for interfacing sensors to read data,relays for controlling devices and zigbee is used for wireless communication to transfer sensor data to ZYNQ controller. Second system consists of ZYNQ, Ethernet controller and Zigbee module. In second System, Zigbee collects sensor data from first system and transfer the data to Internet through Embedded web-server technology. We can access the data through Remote location computer. Any abnormal conditions we can control devices through remote computer. Many open source libraries and tools are available for ZYNQ-linux wireless sensor network development and controlling.
    SOFTWARES USED:
    For implementing this project we are using Linux and Qt for embedded Linux.
    1. LINUX OPERATING SYSTEM
    The Linux open source operating system, or Linux OS, is a freely distributable, cross-platform operating system based on Unix that can be installed on PCs, laptops, net books, mobile and tablet devices, video game consoles, servers, supercomputers and more.
    2. Qt for Embedded Linux
    Qt for Embedded Linux is a C++ framework for GUI and application development for embedded devices. It runs on a variety of processors, usually with Embedded Linux. Qt for Embedded Linux provides the standard Qt API for embedded devices with a lightweight window system.
    3. APLLICATION LANGUAGE C / C++
    4. KEIL Software:
    Used for 8 bit microcontroller program development for sensors and zigbee wireless network’s.
    ADVANTAGES:
    Low power consumption.
    Easy to implement.
    APPLICATIONS:
    It is used in industrial wireless monitoring and controlling.
    REFERENCE:
    1. Datasheets and the user manuals of ZYNQ controller.
    2. Beginning of Linux programming by Neil Matthew, Richard Stones.
  • Minimum Order Quantity: 1 Piece(s)
  • Yes! I am interested

    Clustering Approach To The Problem Of Human Activity

    REQUEST CALLBACK

    Clustering Approach To The Problem Of Human Activity
    Approx. Rs 10,000 / Piece
    Get Best Quote

    Clustering Approach to the Problem of Human Activity Recognition using Motion Data

    Existing System:
    Earlier day’s trainer physically examines athlete’s skill, speed and power through which he makes some assumptions and depending on these assumption athletes would be trained to raise their potential, but there can also be another drawback of having more number of athletes to be trained. These days everything is being digitalized and atomized to make things easy and perfect, so here we are introduIn the past, projectors were isolated machines which needed to be connected to the source where the image was coming from – for example, a laptop. Then network projectors came along, which allowed users operating many projectors (such as schools, universities and large corporations) to connect their projectors to a network and download things like PowerPoint presentations and other media from a central computer. This also allowed remote maintenance of all projectors on the network, which saves organizations using lots of projectors large amounts of time and money. Traditionally, network projectors were wired, meaning that a network cable had to be connected to the projector in order for the projector to connect to the network. Nowadays however, with the advent of wireless internet and Local Area Networks, a number of projectors are advertised as having “wireless” capabilities. Mitsubishi, Epson, and Panasonic are just a few projector manufacturers who have begun to produce wireless cing a new way for monitoring kinematics and psychophysical condition of firefighters.

    Proposed System:
    Here we are taking an example of a firefighter provided with data generated by "smart jacket" a wearable set of body sensors for monitoring kinematics and psychophysical condition of firefighters. The sensors were registering firefighter's vital functions (i.e. ECG, heart rate, respiration rate, skin temperature) and movement by placing seven sets of accelerometers and gyroscopes placed on torso, hands, arms and legs. The task was to find a classification method that maximizes the score value.
    SOFTWARES USED:
    For implementing this project we are using Linux, Qt for embedded Linux.
    LINUX OPERATING SYSTEM
    The Linux open source operating system, or Linux OS, is a freely distributable, cross-platform operating system based on Unix that can be installed on PCs, laptops, net books, mobile and tablet devices, video game consoles, servers, supercomputers and more.

    Qt for Embedded Linux
    Qt for Embedded Linux is a C++ framework for GUI and application development for embedded devices. It runs on a variety of processors, usually with Embedded Linux. Qt for Embedded Linux provides the standard Qt API for embedded devices with a lightweight window system.

    APLLICATION LANGUAGE C / C++
    ADVANTAGES:
    • Trainer can monitor any number of athletes anywhere.
    • The entire scheme is implemented at the application layer. There is no requirement to modify either the PC’s operating system (OS) or the device’s OS or firmware.

    APPLICATIONS:
    • Useful for firefighters and other sport men to increase their ability to score.

    REFERENCE:
    1. Datasheets and the user manuals of ARM controller.
    2. Beginning of Linux programming by Neil Matthew, Richard Stones.
  • Minimum Order Quantity: 1 Piece
  • Yes! I am interested

    Automatic Wireless Embedded Projector Player System

    REQUEST CALLBACK

    Automatic Wireless Embedded Projector Player System
    Approx. Rs 10,000 / Piece(s)
    Get Best Quote

    AUTOMATIC WIRELESS EMBEDDED PROJECTOR PLAYER SYSTEM
    AIM:
    The main objective of the project is to design “Automatic wireless embedded projector player system”.
    INTRODUCTION:
    Wireless projectors give you the flexibility to move around the room while giving a presentation or stand to one side of the screen while the projector sits in the middle of the room. You don't have to lug messy cables with you or worry about tripping on them. Connecting a wireless adapter to your projector lets it connect to your computer from across the room without the need to be physically connected to it. Wireless projector connectivity is a feature that can have huge benefits, not only for users with many projectors such as schools and universities, but also for the individual user, such as sales people on the road. This Bamboo AV Advice article will explain wireless projector connectivity and how it works, and will compare the advantages and disadvantages of the two main types of wireless projectors: “real time” wireless projectors and “upload” wireless projectors. The future of wireless projector connectivity will also be examined; this should help you to choose the type of wireless projector that is best for your presentation application.
    projectors.
    EXISTING METHOD:
    In existing method, in which wired projector is used to project videos or images on a local screen for the use of many people. Nowadays, it has widespread usage at the places intended to reach crowd such as education and training environments, stages or squares in addition to conference rooms. Users who are going to present, connect their own laptops to the projection device respectively by cables in some standards such as DVI, HDMI, and VGA. However that brings some constraints and challenges. Secondly, damages on the cables obstruct to carry out the presentation, to solve the problems, advanced projection devices with built-in full supported operating system and USB ports should be used in stages. But this orientation wills be expensive. There is a 5 times difference in price.
    PROPOSED METHOD:
    In our proposed method we are projecting videos ,audio and any data remotely to the ARM board which is connected to the projector from a laptop where the ARM processor and our system is connected through Wi-Fi , so that we can communicate with the projector from remote locations by typing the IP address of the corresponding ARM board , and we can transfer the audio, video through Wi-Fi module at the receiving end router connected to ARM board will receive signals and send to the projector , here we are using a low cost system to implement this project. My system is designed by using ARM 32-bit micro controller which supports different features and algorithms for the development of automotive systems.
    SOFTWARES USED:
    For implementing this project we are using Linux, Qt for embedded Linux.
    1. LINUX OPERATING SYSTEM
    The Linux open source operating system, or Linux OS, is a freely distributable, cross-platform operating system based on Unix that can be installed on PCs, laptops, net books, mobile and tablet devices, video game consoles, servers, supercomputers and more.
    2. Qt for Embedded Linux
    Qt for Embedded Linux is a C++ framework for GUI and application development for embedded devices. It runs on a variety of processors, usually with Embedded Linux. Qt for Embedded Linux provides the standard Qt API for embedded devices with a lightweight window system.
    3. APPLICATION LANGUAGE C / C++

    ADVANTAGES:
    Low cost
    Easy to implement.
    Provides good quality of services.
    APPLICATIONS:
    It is used in companies.
  • Minimum Order Quantity: 1 Piece(s)
  • Yes! I am interested

    A Framework For Remote And Adaptive Partial Reconfiguration

    REQUEST CALLBACK

    A Framework For Remote And Adaptive Partial Reconfiguration
    Approx. Rs 10,000 / Piece(s)
    Get Best Quote

    A Framework for Remote and Adaptive Partial Reconfiguration of SoC Based Data Acquisition Systems Under Linux
    AIM: The main objective of the project is to design “A Framework for Remote and Adaptive Partial Reconfiguration of SoC Based Data Acquisition Systems under Linux”.
    EXISTING METHOD:
    Automatic control panel are available in industries for monitoring and controlling the parameters of machines and hence final product. But most of the control panels in industries are wire panels and machines are controlled and monitor by the control room operator using wire network. The wires are moving through conducts, sometimes inside walls and sometimes underground also. So breakdown maintenance of these wires is difficult task in industries. As these wires are not open so it is difficult to locate the fault. And even after locating the fault it takes time to repair them. The second disadvantages of this method are operator console can not move from one room to another. Every time operator has to go to particular room to monitor and control the operation.
    PROPOSED METHOD:
    Technologies:
    Wireless sensor network:
    A wireless sensor network (WSN) of spatially distributed autonomous sensors to monitor physical or environmental conditions, such as temperature, LDR, Fire, etc. and to cooperatively pass their data through the network to a main location. The more modern networks are bi-directional, also enabling control of sensor activity. The development of wireless sensor networks was motivated by military applications such as battlefield surveillance; today such networks are used in many industrial and consumer applications, such as industrial process monitoring and control, machine health monitoring.
    Wireless Sensor network
    Implementation method:
    We are designing advanced embedded system by using wireless sensor network. We are designed a system by using ZYNQ and 8051 which supports different features and algorithms for the development of industrial automation systems. In these project we are using two systems for two-way communication, One system consist of Microcontroller-atlmel (89s52) is used for interfacing sensors to read data,relays for controlling devices and zigbee is used for wireless communication to transfer sensor data to ZYNQ controller. Second system consists of ZYNQ, Ethernet controller and Zigbee module. In second System, Zigbee collects sensor data from first system and transfer the data to Internet through Embedded web-server technology. We can access the data through Remote location computer.
    TRANSMITTER:
    SOFTWARES USED:
    For implementing this project we are using Linux and Qt for embedded Linux.
    1. LINUX OPERATING SYSTEM
    The Linux open source operating system, or Linux OS, is a freely distributable, cross-platform operating system based on Unix that can be installed on PCs, laptops, net books, mobile and tablet devices, video game consoles, servers, supercomputers and more.
    2. Qt for Embedded Linux
    Qt for Embedded Linux is a C++ framework for GUI and application development for embedded devices. It runs on a variety of processors, usually with Embedded Linux. Qt for Embedded Linux provides the standard Qt API for embedded devices with a lightweight window system.
    3. APLLICATION LANGUAGE C / C++
    4. KEIL Software:
    Used for 8 bit microcontroller program development for sensors and zigbee wireless network’s.
    ADVANTAGES:
    Low power consumption.
    Easy to implement.
    APPLICATIONS:
    It is used in industrial wireless monitoring and controlling.
    REFERENCE:
    1. Datasheets and the user manuals of ZYNQ controller.
    2. Beginning of Linux programming by Neil Matthew, Richard Stones.
  • Minimum Order Quantity: 1 Piece(s)
  • Yes! I am interested

    Embedded Web Server For Real-time Remote Control And Monitor

    REQUEST CALLBACK

    Embedded Web Server For Real-time Remote Control And Monitor
    Approx. Rs 10,000 / Piece(s)
    Get Best Quote

    Embedded Web Server for Real-time Remote Control and Monitoring of an FPGA-based On-Board Computer System

    AIM:
    The main aim of the project is to design “Embedded Web Server for Real-time Remote Control and Monitoring of an FPGA-based On-Board Computer System”.
    INTRODUCTION
    A new generation of reconfigurable FPGA-based on-board computer (OBC) has experienced a rapid development in a wide range of applications that include upgrade capability (Space and automobile applications, medical field, industrial control system). This was accompanied by an increased need to monitor, maintain and update these systems. On the other hand, Web technology becomes widely used and there is an ascending trend to migrate everything online and to remotely control systems. In this regard, several studies have emerged suggesting the implementation of the embedded Web server technology to provide a monitor and control system based on an Internet browser and an embedded TCP/IP protocol suite.
    OBJECTIVE:
    In comparison with PC, the embedded system is greatly improved in stability, reliability and safety etc. The embedded system transplanted web server can be called embedded web server. Through web page posted by embedded web server, remote users can obtain the real-time status information and control remote equipment’s without time and space restriction. In this project the monitoring and controlling of devices is achieved using TCP/IP protocol and the Raspberry Pi. The TCP/IP protocol is the vital part, as it is used for the implementation of Embedded Web server.
    This project consists of two parts, a server module which is connected to internet through RJ45 interface and a sensor module which always reads values from the sensors and is published on the internet. So the user can monitor and control the devices through Browser.
    When the client types the correct IP address in the browser, the webpage displays the sensors values to the user and if there are any discrepancies in the values, then the user can control the device through a relay connected to the sensor module. Apart from controlling the devices remotely, automatic controlling procedure is also provided to control the devices.
    Block diagram

    SOFTWARES USED:
    For implementing this project we are using Linux, Qt for embedded Linux.
    1. LINUX OPERATING SYSTEM
    The Linux open source operating system, or Linux OS, is a freely distributable, cross-platform operating system based on Unix that can be installed on PCs, laptops, net books, mobile and tablet devices, video game consoles, servers, supercomputers and more.
    2. Qt for Embedded Linux
    Qt for Embedded Linux is a C++ framework for GUI and application development for embedded devices. It runs on a variety of processors, usually with Embedded Linux. Qt for Embedded Linux provides the standard Qt API for embedded devices with a lightweight window system.
    3. APLLICATION LANGUAGE C / C++
    ADVANTAGES:
    High quality.
    Low cost, easy to implement.
    APPLICATIONS:
    For security purpose
    REFERENCE:
    1. Datasheets and the user manuals of ARM controller.
    2. Beginning of Linux programming by Neil Matthew, Richard Stones.
  • Minimum Order Quantity: 1 Piece(s)
  • Yes! I am interested

    Multi-task Pose-invariant Face Recognition

    REQUEST CALLBACK

    Multi-task Pose-invariant Face Recognition
    Approx. Rs 10,000 / Piece(s)
    Get Best Quote

    MULTI-TASK POSE-INVARIANT FACE RECOGNITION

    AIM: The main objective of the project is to design “Multi-task Pose-Invariant Face Recognition”.
    EXISTING METHOD:
    In the existing system by using cameras monitoring should be done continuously in the control room. To recognize a particular person/victim among the crowd by the person inside the control is not possible to identify and the chances of identifying the person is very less which is not accurate. So, in order to identify the particular person/victim continues monitoring is required without any interrupt.
    PROPOSED METHOD:
    The proposed system is designed to identify the features of the person based on the images stored inside controller. This system takes capture image by means of web camera connected to ARM microcontroller through USB and the image is processed by using image processing technique. Image processing is any form of signal processing for which the input is an image, such as a photograph or video frame.The output of image processing may be either an image or a set of characteristics or parameters related to the image. In our system we can store our own images by using train key and after storing the images we can identify person in photos when camera captures person in photos comes in front of camera.

    BLOCK DIAGRAM:

    SOFTWARES USED:
    For implementing this project we are using Linux, Qt for embedded Linux and open CV library.

    1. LINUX OPERATING SYSTEM
    The Linux open source operating system, or Linux OS, is a freely distributable, cross-platform operating system based on Unix that can be installed on PCs, laptops, net books, mobile and tablet devices, video game consoles, servers, supercomputers and more.

    2. Qt for Embedded Linux
    Qt for Embedded Linux is a C++ framework for GUI and application development for embedded devices. It runs on a variety of processors, usually with Embedded Linux. Qt for Embedded Linux provides the standard Qt API for embedded devices with a lightweight window system.

    3. OPEN CV
    Open CV is an open source computer vision library originally developed by Intel. It is free for commercial and research use under a BSD (Berkeley Software Distribution) license. The library is cross-platform, and runs on Linux, Windows and Mac OS X. It focuses mainly towards real-time image processing, as such, if it finds Intel's Integrated Performance Primitives on the system, it will use these commercial optimized routines to accelerate itself.
    4. APLLICATION LANGUAGE C / C++
    ADVANTAGES:
    It is used to provide the security.
    Automatic monitoring system.
    It avoids potential human errors.

    APPLICATIONS:
    It is used in corporate offices, Government offices, Schools, Colleges, etc.
    REFERENCE:
    1. Datasheets and the user manuals of ARM controller.
    2. Beginning of Linux programming by Neil Matthew, Richard Stones.
  • Minimum Order Quantity: 1 Piece(s)
  • Yes! I am interested

    A Robust Approach For Offline English Character Recognition

    REQUEST CALLBACK

    A Robust Approach For Offline English Character Recognition
    Approx. Rs 10,000 / Piece
    Get Best Quote

    OBJECTIVE:
    The main objective of the project is to “A Robust Approach For Offline English Character
    Recognition”.

    EXISTING SYSTEM:
    In existing system the camera is used to detect human faces, objects and vehicles on the roads. Here cameras using for surveillance purpose and remote location applications, speed detection. But there is no particular method for handwriting recognition.
    PROPOSED SYSTEM:
    In proposed system, we are implementing a new method for recognizing hand written characters and storing the characters in a data base for future use. Here, an advanced processor board Raspberry pi (ARM) is used for processing the data i.e. for recognizing hand written characters on paper. Here, whatever the character written on paper by the user, we show that character in front of web camera connected to the board, then camera captures this image and compare the character present in that image with the standard keyboard characters present in database. if this character matches with the standard keyboard character then it will display on display unit . Hence we are trying to implement an Izhikevich neuron model to get comparatively faster and more accurate error free result.
    Character written on paper

    SOFTWARES USED:
    For implementing this project we are using Linux, Qt for embedded Linux and open CV library.
    • LINUX OPERATING SYSTEM
    The Linux open source operating system, or Linux OS, is a freely distributable, cross-platform operating system based on Unix that can be installed on PCs, laptops, net books, mobile and tablet devices, video game consoles, servers, supercomputers and more.
    • Qt for Embedded Linux
    Qt for Embedded Linux is a C++ framework for GUI and application development for embedded devices. It runs on a variety of processors, usually with Embedded Linux. Qt for Embedded Linux provides the standard Qt API for embedded devices with a lightweight window system.
    • APLLICATION LANGUAGE: C / C++
    ADVANTAGES:
    It removes physical hardware requirement.
    Portability, Accuracy and Flexibility.
    Automatic detection
    APPLICATIONS:
    Schools and colleges
    REFERENCE:
    1. Datasheets and the user manuals of ARM controller.
    2. Beginning of Linux programming by Neil Matthew, Richard Stones.
  • Minimum Order Quantity: 1 Piece
  • Yes! I am interested

    License Plate Location For Vehicles Passing Through Gate

    REQUEST CALLBACK

    License Plate Location For Vehicles Passing Through Gate
    Approx. Rs 10,000 / Piece(s)
    Get Best Quote

    LICENSE PLATE LOCATION FOR VEHICLES PASSING THROUGH GATE
    AIM:
    The main aim of the project is to design “LICENSE PLATE LOCATION FOR VEHICLES PASSING THROUGH GATE”.
    EXISTING METHOD:
    License plate recognition plays an important role in numerous real-life applications, such as automatic toll collection, traffic law enforcement, and parking lot access control, and road traffic monitoring.
    In the existing system the number plate can be recognized by RFID module. The RFID tag consists of plate number. The reader will recieves the number and sends to controller. The controller will recognize the number plate based on reader information. Here main draw back is RFID module can be interfered with other radio transmissions, metals, liquids, etc. The degree of interference depends upon the frequency of the tag and the usage environment.
    PROPOSED METHOD:
    The proposed method is used to overcome the drawback present in exsting system. Here we are using camera instead of RFID module. The
    Our proposed system extracts a license plate number from a given image can be composed of four stages. The first stage is to acquire the car image using a camera. The parameters of the camera, such as the type of camera, camera resolution, shutter speed, orientation, and light, have to be considered. The second stage is to extract the license plate from the image based on some features, such as the boundary, the color, or the existence of the characters. The third stage is to segment the license plate and extract the characters by projecting their color information, labeling them, or matching their positions with templates. The final stage is to recognize the extracted characters by template matching.
    Our system uses ARM 32-bit architecture has a feature of image/video processing by using open CV libraries. It overcomes the performance in terms of interfacing RFID module and hardware cost is also too high. So, our design system that detects partially visible number plates just as they enter the camera views, with low false alarm rate and high speed.

    BLOCK DIAGRAM:

    SOFTWARES USED:
    For implementing this project we are using Linux, Qt for embedded Linux and open CV library.
    1. LINUX OPERATING SYSTEM
    The Linux open source operating system, or Linux OS, is a freely distributable, cross-platform operating system based on Unix that can be installed on PCs, laptops, net books, mobile and tablet devices, video game consoles, servers, supercomputers and more.
    2. Qt for Embedded Linux
    Qt for Embedded Linux is a C++ framework for GUI and application development for embedded devices. It runs on a variety of processors, usually with Embedded Linux. Qt for Embedded Linux provides the standard Qt API for embedded devices with a lightweight window system.
    3. OPEN CV
    Open CV is an open source computer vision library originally developed by Intel. It is free for commercial and research use under a BSD (Berkeley Software Distribution) license. The library is cross-platform, and runs on Linux, Windows and Mac OS X. It focuses mainly towards real-time image processing, as such, if it finds Intel's Integrated Performance Primitives on the system, it will use these commercial optimized routines to accelerate itself.
    4. APLLICATION LANGUAGE C / C++

    ADVANTAGES:
    ??? Automatic monitoring system.
    ??? It avoids potential human errors.

    APPLICATIONS:
    ??? It is used traffic signals.

    REFERENCE:
    1. Datasheets and the user manuals of ARM controller.
    2. Beginning of Linux programming by Neil Matthew, Richard Stones.

  • Minimum Order Quantity: 1 Piece(s)
  • Yes! I am interested

    Research And Development Of Data Acquisition System

    REQUEST CALLBACK

    Research And Development Of Data Acquisition System
    Approx. Rs 10,000 / Piece(s)
    Get Best Quote

    Automatic Wireless Embedded Projector Player System
    AIM:
    The main objective of the project is to design “Automatic wireless embedded projector player system”.
    INTRODUCTION:
    Wireless projectors give you the flexibility to move around the room while giving a presentation or stand to one side of the screen while the projector sits in the middle of the room. You don't have to lug messy cables with you or worry about tripping on them. Connecting a wireless adapter to your projector lets it connect to your computer from across the room without the need to be physically connected to it. Wireless projector connectivity is a feature that can have huge benefits, not only for users with many projectors such as schools and universities, but also for the individual user, such as sales people on the road. This Bamboo AV Advice article will explain wireless projector connectivity and how it works, and will compare the advantages and disadvantages of the two main types of wireless projectors: “real time” wireless projectors and “upload” wireless projectors. The future of wireless projector connectivity will also be examined; this should help you to choose the type of wireless projector that is best for your presentation application.
    EXISTING METHOD:
    In existing method, in which wired projector is used to project videos or images on a local screen for the use of many people. Nowadays, it has widespread usage at the places intended to reach crowd such as education and training environments, stages or squares in addition to conference rooms. Users who are going to present, connect their own laptops to the projection device respectively by cables in some standards such as DVI, HDMI, and VGA. However that brings some constraints and challenges. Secondly, damages on the cables obstruct to carry out the presentation, to solve the problems, advanced projection devices with built-in full supported operating system and USB ports should be used in stages. But this orientation wills be expensive. There is a 5 times difference in price.
    PROPOSED METHOD:
    In our proposed method we are projecting videos ,audio and any data remotely to the ARM board which is connected to the projector from a laptop where the ARM processor and our system is connected through Wi-Fi , so that we can communicate with the projector from remote locations by typing the IP address of the corresponding ARM board , and we can transfer the audio, video through Wi-Fi module at the receiving end router connected to ARM board will receive signals and send to the projector , here we are using a low cost system to implement this project.
    SOFTWARES USED:
    For implementing this project we are using Linux, Qt for embedded Linux.
    1. LINUX OPERATING SYSTEM
    The Linux open source operating system, or Linux OS, is a freely distributable, cross-platform operating system based on Unix that can be installed on PCs, laptops, net books, mobile and tablet devices, video game consoles, servers, supercomputers and more.
    2. Qt for Embedded Linux
    Qt for Embedded Linux is a C++ framework for GUI and application development for embedded devices. It runs on a variety of processors, usually with Embedded Linux. Qt for Embedded Linux provides the standard Qt API for embedded devices with a lightweight window system.
    3. APPLICATION LANGUAGE C / C++

    ADVANTAGES:
    Low cost
    Easy to implement.
    Provides good quality of services.
    APPLICATIONS:
    It is used in companies.
    REFERENCE:
    1. Datasheets and the user manuals of ARM controller.
    2. Beginning of Linux programming by Neil Matthew, Richard Stones.
  • Minimum Order Quantity: 1 Piece(s)
  • Yes! I am interested

    Detection Of Sudden Pedestrian Crossings

    REQUEST CALLBACK

    Detection Of Sudden Pedestrian Crossings
    Approx. Rs 10,000 / Piece(s)
    Get Best Quote

    Detection of Sudden Pedestrian Crossings for Driving Assistance Systems
    AIM:
    The main objective of the project is to “Detection of Sudden Pedestrian Crossings for Driving Assistance Systems”.
    EXISTING METHOD:
    Right now the driver will continuously observe the pedestrian present while driving and the driver will listen the announcements regarding pedestrian and based on the announcement the driver will observe and paying attention on driving. If the driver is in drowsiness may leads to accidents.
    PROPOSED METHOD:
    We are aware of the problem of detecting pedestrian crossings to assist drivers in avoiding accidents. We design embedded system, the application has two major requirements: to detect crossing pedestrians as early as possible just as they enter the view of the car-mounted camera and to give warning indication through green and red lights. Green light indicates the system is active. Red light indicates presence of a pedestrian in a potential route of collision.
    This system takes capture image by means of web camera connected to ARM through USB and the image is processed by using image processing technique. Image processing is any form of signal processing for which the input is an image, such as a photograph or video frame; the output of image processing may be either an image or a set of characteristics or parameters related to the image. The crossing of a pedestrian image is analyzed as shown in the block diagram. When any pedestrian is detected particular light will blink to give alert indication and also it stops vehicle automatically. The display unit in vehicle provides clear details at position it detects pedestrian either right or left.
    BLOCK DIAGRAM:


    SOFTWARES USED:

    For implementing this project we are using Linux, Qt for embedded Linux and open CV library.

    1. LINUX OPERATING SYSTEM
    The Linux open source operating system, or Linux OS, is a freely distributable, cross-platform operating system based on Unix that can be installed on PCs, laptops, net books, mobile and tablet devices, video game consoles, servers, supercomputers and more.

    2. Qt for Embedded Linux
    Qt for Embedded Linux is a C++ framework for GUI and application development for embedded devices. It runs on a variety of processors, usually with Embedded Linux. Qt for Embedded Linux provides the standard Qt API for embedded devices with a lightweight window system.

    3. OPEN CV
    Open CV is an open source computer vision library originally developed by Intel. It is free for commercial and research use under a BSD (Berkeley Software Distribution) license. The library is cross-platform, and runs on Linux, Windows and Mac OS X. It focuses mainly towards real-time image processing, as such, if it finds Intel's Integrated Performance Primitives on the system, it will use these commercial optimized routines to accelerate itself.

    4. APLLICATION LANGUAGE C / C++

    ADVANTAGES:
    It avoids the accidents while driving.
    Automatic monitoring system.
    It avoids potential human errors.
    APPLICATIONS:
    • It is used at High ways, School zones, Roads, etc.

    REFERENCE:
    1. Datasheets and the user manuals of ARM controller.
    2. Beginning of Linux programming by Neil Matthew, Richard Stones.
  • Minimum Order Quantity: 1 Piece(s)
  • Yes! I am interested

    Towards The Implementation Of Iot For Environmental

    REQUEST CALLBACK

    Towards The Implementation Of Iot For Environmental
    Approx. Rs 10,000 / Piece
    Get Best Quote

    TOWARDS THE IMPLEMENTATION OF IOT FOR ENVIRONMENTAL CONDITION MONITORING IN HOMES
    AIM: The main objective of the project is to design “Towards the Implementation of IoT for Environmental Condition Monitoring in Homes”.
    EXISTING METHOD:
    Automatic control panel are available in home for monitoring and controlling the parameters of machines and hence final product. The wires are moving through conducts, sometimes inside walls and sometimes underground also. So breakdown maintenance of these wires is difficult task in home. As these wires are not open so it is difficult to locate the fault. And even after locating the fault it takes time to repair them. The second disadvantages of this method are operator console can not move from one room to another. Every time operator has to go to particular room to monitor and control the operation.
    PROPOSED METHOD:
    Implementation method:
    We are designing advanced embedded system by using wireless sensor network and Internet of Things. We are designed a system by using ARM 11 processor which supports different features and algorithms for the development of home environmental conditions. The proposed system consists of ARM11 processor, Ethernet, Wi-Fi module and some sensors like temperature, light, rain and air flow sensors for monitoring both inside and outside environmental conditions of home. The sensors will continuously send the data to the processor and the processor transfer the data to Internet through Embedded web-server technology. We can access the data through Remote location computer. If any abnormal conditions will takes place then it is easy to get the information to our mobile/laptop through Wi-Fi by typing an IP address. Many open source libraries and tools are available for ARM-linux wireless sensor network development. Even we have a memory unit in order to track environmental conditions
    SOFTWARES USED:
    For implementing this project we are using Linux and Qt for embedded Linux.

    1. LINUX OPERATING SYSTEM
    The Linux open source operating system, or Linux OS, is a freely distributable, cross-platform operating system based on Unix that can be installed on PCs, laptops, net books, mobile and tablet devices, video game consoles, servers, supercomputers and more.

    2. Qt for Embedded Linux
    Qt for Embedded Linux is a C++ framework for GUI and application development for embedded devices. It runs on a variety of processors, usually with Embedded Linux. Qt for Embedded Linux provides the standard Qt API for embedded devices with a lightweight window system.

    3. APLLICATION LANGUAGE C / C++

    ADVANTAGES:
    Low power consumption.
    Easy to implement.

    APPLICATIONS:
    It is used in industrial wireless monitoring and controlliong.

    REFERENCE:
    1. Datasheets and the user manuals of ARM controller.
    2. Beginning of Linux programming by Neil Matthew, Richard Stones.
  • Minimum Order Quantity: 1 Piece
  • Yes! I am interested

    Izhikevich Model Based Pattern Classifier For Hand Written

    REQUEST CALLBACK

    Izhikevich Model Based Pattern Classifier For Hand Written
    Approx. Rs 10,000 / Piece(s)
    Get Best Quote

    IZHIKEVICH MODEL BASED PATTERN CLASSIFIER FOR
    HAND WRITTEN CHARACTER RECOGNITION- A
    REVIEW ANALYSIS

    OBJECTIVE:
    The main objective of the project is to “Izhikevich Model based Pattern Classifier for Hand Written Character Recognition- a Review Analysis”.

    EXISTING SYSTEM:
    In existing system the camera is used to detect human faces, objects and vehicles on the roads. Here cameras using for surveillance purpose and remote location applications, speed detection. But there is no particular method for handwriting recognition.
    PROPOSED SYSTEM:
    In proposed system, we are implementing a new method for recognizing hand written characters and storing the characters in a data base for future use. Here, an advanced processor board Raspberry pi (ARM) is used for processing the data i.e. for recognizing hand written characters on paper. Here, whatever the character written on paper by the user, we show that character in front of web camera connected to the board, then camera captures this image and compare the character present in that image with the standard keyboard characters present in database. if this character matches with the standard keyboard character then it will display on display unit . Hence we are trying to implement an Izhikevich neuron model to get comparatively faster and more accurate error free

    Character written on paper

    SOFTWARES USED:
    For implementing this project we are using Linux, Qt for embedded Linux and open CV library.
    • LINUX OPERATING SYSTEM
    The Linux open source operating system, or Linux OS, is a freely distributable, cross-platform operating system based on Unix that can be installed on PCs, laptops, net books, mobile and tablet devices, video game consoles, servers, supercomputers and more.
    • Qt for Embedded Linux
    Qt for Embedded Linux is a C++ framework for GUI and application development for embedded devices. It runs on a variety of processors, usually with Embedded Linux. Qt for Embedded Linux provides the standard Qt API for embedded devices with a lightweight window system.
    • APLLICATION LANGUAGE: C / C++
    ADVANTAGES:
    It removes physical hardware requirement.
    Portability, Accuracy and Flexibility.
    Automatic detection
    APPLICATIONS:
    Schools and colleges
    REFERENCE:
    1. Datasheets and the user manuals of ARM controller.
    2. Beginning of Linux programming by Neil Matthew, Richard Stones.
  • Minimum Order Quantity: 1 Piece(s)
  • Yes! I am interested

    Hardware/Software Co-design Of Video Processing

    REQUEST CALLBACK

    Hardware/Software Co-design Of Video Processing
    Approx. Rs 10,000 / Piece(s)
    Get Best Quote

    Hardware/Software co-design of video processing
    Applications on a reconfigurable platform
    AIM:
    The main objective of the project is to “Hardware/Software co-design of video processing applications on a reconfigurable platform”.
    EXISING SYSTEM:
    In Existing system the webcam is used to take frames and processor processes that frames and gives result in the form of original image. so at output side of processor there is only one image that is original image. so to get images in different format like original image,sobel filtered image, color filtered image ,threshold filtered image we are going for proposed system.
    PROPOSED SYSTEM:
    The use of a reconfigurable platform, based on the Zynq-7000 Xilinx family, for hardware/software co-design of video processing applications is described in this work. The computing capability of ARM processors included in the device allows performing I/O and processing task by using conventional software libraries.
    In this proposed system we are taking the frames with the help of usb webcam and transmit these frames to the Xilinx zinq processor then processor process these frames and result ie.origional image,sobel filtered image, color filtered image and threshold filtered image will be display on the display unit . Once images placed at server we can view the images at remote PC (with internet) on web page with dynamic IP address.
    SOFTWARES USED:
    For implementing this project we are using Linux, Qt for embedded Linux and open CV library.
    •LINUX OPERATING SYSTEM
    The Linux open source operating system, or Linux OS, is a freely distributable, cross-platform operating system based on Unix that can be installed on PCs, laptops, net books, mobile and tablet devices, video game consoles, servers, supercomputers and more.
    •Qt for Embedded Linux
    Qt for Embedded Linux is a C++ framework for GUI and application development for embedded devices. It runs on a variety of processors, usually with Embedded Linux. Qt for Embedded Linux provides the standard Qt API for embedded devices with a lightweight window system.
    • OPEN CV
    Open CV is an open source computer vision library originally developed by Intel. It is free for commercial and research use under a BSD (Berkeley Software Distribution) license. The library is cross-platform, and runs on Linux, Windows and Mac OS X. It focuses mainly towards real-time image processing, as such, if it finds Intel's Integrated Performance Primitives on the system
    • APLLICATION LANGUAGE C / C++
    ADVANTAGES:
    One of the biggest advantage is ability to post-process the image. Post-processing of the image allows the operator to manipulate the pixel shades to correct image density and contrast, as well as perform other processing functions that could result in improved diagnosis and fewer repeated examinations.
    APPLICATIONS:
    • Image sharpening and restoration
    • Film
    • Medical field
    • Remote sensing
    • Transmission and encoding
    • Machine/Robot vision
    • Color processing
    • Pattern recognition
    • Video processing
    • Microscopic Imaging
    • Others
  • Minimum Order Quantity: 1 Piece(s)
  • Yes! I am interested

    Swapping Strategy to Improve I/O Performance of Embedded

    REQUEST CALLBACK

    Swapping Strategy to Improve I/O Performance of Embedded
    Approx. Rs 10,000 / Piece(s)
    Get Best Quote

    Swapping Strategy to Improve I/O Performance of Embedded Systems Using Compressed File Systems
    AIM:
    The main objective of the project is to design “Swapping Strategy to Improve I/O Performance of Embedded Systems Using Compressed File Systems”
    ABSTRACT:
    Compressed file systems are suitable for embedded systems with small capacity of storage systems because the contents of files are stored in a compressed form to save the space of storage in the compressed file systems. Therefore a data should be decompressed before it is accessed by an application program. That is a computational overhead of compressed file systems. Furthermore, the mobile embedded systems exploit demand paging mechanism to cut down their cost and size as well as the compressed file systems. And also, to extend a main memory space, the mobile embedded systems use “swapping” mechanism which stores the data evicted from a main memory in a swap area, and serves the data when the application requests it again. In this paper, we propose the new swapping strategy for the mobile embedded systems using the compressed file systems, which aims to keep the decompressed data of compressed file systems in the swap space and serves them directly from the swap space if necessary. This strategy reduces several copying overhead and decompressing operation of compressed file systems. As a result, it could improve the I/O performance of mobile embedded systems. Trace-driven simulations show that the proposed strategy performs better than existing swapping mechanism in terms of the total I/O performance.
    In Raspbian OS, the swap area is very limited. So first we are going to increase the swap area in the Present OS. Next, we are making that swap area available to user’s so that users can place any applications in that swap area and can use the applications with fast Access.

    SOFTWARES USED:
    For implementing this project we are using Linux, Qt for embedded Linux.
    1. LINUX OPERATING SYSTEM
    The Linux open source operating system, or Linux OS, is a freely distributable, cross-platform operating system based on Unix that can be installed on PCs, laptops, net books, mobile and tablet devices, video game consoles, servers, supercomputers and more.
    2. APPLICATION LANGUAGE C / C++

    ADVANTAGES:
    Low cost
    Provides good quality of services.
    Increases performance speed
    REFERENCE:
    1. Datasheets and the user manuals of ARM controller.
    2. Beginning of Linux programming by Neil Matthew, Richard Stones.
  • Minimum Order Quantity: 1 Piece(s)
  • Yes! I am interested

    A Method of Detecting Abnormal Program Behavior on Embedded

    REQUEST CALLBACK

    A Method of Detecting Abnormal Program Behavior on Embedded
    Approx. Rs 10,000 / Piece(s)
    Get Best Quote

    A Method of Detecting Abnormal Program Behavior on Embedded Devices

    OBJECTIVE:
    The main aim of the project is to “A Method of Detecting Abnormal Program Behavior on Embedded Devices”.
    Existing method:
    In existing system nodes sending information to target device will be common factor in industries but we don't know weather nodes sending correct information or garbage values or previous values immediately to rectify the situation. To overcome this problem we are implementing the proposed method.
    Proposed Method:
    In this proposed method, we are using an advanced open source ARM32 bit microprocessor which is having advanced features support to complete our task. In order to overcome the disadvantage in existing method we are implementing the concept to get the proper information about the status of the modules (Memory Unit and Nodes unit) weather active or inactive stages in runtime to take an immediate action. In general run time modules information up-gradation can be accessible in control panel. In case of runtime devices disconnection we will get an recently updated information or garbage information for the control unit, where they need more response time to identify the updated info will proper or not. In order to reduce troubleshooting time on run time module issues these concept will provide a solution. Nodes unit data will be store on memory unit for any accuracy comparison between time period and the total data will be updated lively on webserver through IP(Internet Protocol) Address.
    BLOCK DIAGRAM:
    SOFTWARES USED:
    For implementing this project we are using Linux, Qt for embedded Linux.
    1. LINUX OPERATING SYSTEM (UBUNTU)
    2. QT CREATOR
    3. APLLICATION LANGUAGE C / C++
    Technologies:
    HTTP
    IOT
    I2C
    ADVANTAGES:
    Easy to implement and low power consumption .
    Easley find out the disconnected modules connected to ARM on run time.
    Less time for trouble shooting
    less cost
    APPLICATIONS:
    Agriculture
    Industries
    Home, Shopping malls.
    REFERENCE:
    1. Datasheets and the user manuals of ARM controller.
    2. Beginning of Linux programming by Neil Matthew, Richard Stones.
  • Minimum Order Quantity: 1 Piece(s)
  • Yes! I am interested

    A New Writing Experience_ Finger Writing In The Air

    REQUEST CALLBACK

    A New Writing Experience_ Finger Writing In The Air
    Approx. Rs 10,000 / Piece(s)
    Get Best Quote

    A New Writing Experience_ Finger Writing in the Air Using a Kinect Sensor
    AIM:
    The main aim of the project is to design “A New Writing Experience: Finger Writing in the Air Using a Kinect Sensor”
    INTRODUCTION:
    The project is aimed at evaluating the performance of an operating system on an embedded system. Before delving into its implementation, an introduction is needed to the parts involved in the project. The whole report is centered around the field of embedded systems and the use of Linux to run applications on them. Hence an introduction to Embedded Systems and using Linux as an OS in them is provided.
    EXISTING SYSTEM:

    Digital pen with trajectory recognition can be done by using accelerometer. The digital pen consists of a triaxial accelerometer, a microcontroller, and an RF wireless transmission module for sensing and collecting accelerations of handwriting and gesture trajectories. Our embedded project first extracts the time- and frequency-domain features from the acceleration signals and, then transmits the signals by using RF transmitter. In receiver section RF signals can be received by RF receiver and given to micro controller. The controller processes the information and finally the results can be displayed on Graphical LCD.

    PROPOSED METHOD
    In proposed system, we are going to use webcam, ARM microcontroller and display unit. Here, we are using pen or hand for drawing in front of the camera then whatever we are going to draw in front of it will be displayed on the display unit. Our embedded system is capable of translating time-series acceleration signals into important feature vectors. Users can use the pen to write digits or make hand gestures etc can be displayed on the display unit.
    SOFTWARES USED:
    For implementing this project we are using Linux, Qt for embedded Linux.
    1. LINUX OPERATING SYSTEM
    The Linux open source operating system, or Linux OS, is a freely distributable, cross-platform operating system based on Unix that can be installed on PCs, laptops, net books, mobile and tablet devices, video game consoles, servers, supercomputers and more.
    2. Qt for Embedded Linux
    Qt for Embedded Linux is a C++ framework for GUI and application development for embedded devices. It runs on a variety of processors, usually with Embedded Linux. Qt for Embedded Linux provides the standard Qt API for embedded devices with a lightweight window system.
    3. APLLICATION LANGUAGE C / C++

    ADVANTAGES:
    High quality.
    Low cost, easy to implement.
    APPLICATIONS:
    Security.
    Industries.
    Home.
    Gamming.
    Offices etc.

    REFERENCE:
    1. Datasheets and the user manuals of ARM controller.
    2. Beginning of Linux programming by Neil Matthew, Richard Stones.

  • Minimum Order Quantity: 1 Piece(s)
  • Yes! I am interested

    Application Of Data Hiding In Audio-video

    REQUEST CALLBACK

    Application Of Data Hiding In Audio-video
    Approx. Rs 10,000 / Piece(s)
    Get Best Quote

    Application Of Data Hiding In Audio-video Using Anti Forensics Technique For Authentication And Data Security
    Aim:

    The main objective of the project is to design “Application of data hiding in audio-video using anti forensics technique for authentication and data security”.
    EXISTING METHOD:
    In previous, cryptography is used for encryption of data and provides data security. But actually term cryptography provides privacy. Privacy is what you need when you use your credit card on the Internet -- you don't want your number revealed to the public. For this, you use cryptography, and send a coded pile of gibberish that only the web site can decipher. Though your code may be unbreakable, any hacker can look and see you've sent a message.
    What is Steganograhy?
    Steganography is the art of covered or hidden writing. The purpose of steganography is covert communication to hide a message from a third party. This differs from cryptography, the art of secret writing, which is intended to make a message unreadable by a third party but does not hide the existence of the secret communication. Although steganography is separate and distinct from cryptography, there are many analogies between the two, and some authors categorize steganography as a form of cryptography since hidden communication is a form of secret writing.
    PROPOSED METHOD:
    Our system is designed by using 32-bit ARM controllers for image, audio and video steganography. The embedded system will help to secure the message with in the audio and video file. In Embedded system, the message much secure because even though if the unauthorized person succeeds in being able to hack the image, the person will not able to read the message as well as acquire the information in the audio file. Secret data like image and audio is encrypted into cover data by developing the application involved with LSB algorithm on ARM architecture device.

    SOFTWARES USED:
    For implementing this project we are using Linux, Qt for embedded Linux.
    1. LINUX OPERATING SYSTEM
    The Linux open source operating system, or Linux OS, is a freely distributable, cross-platform operating system based on Unix that can be installed on PCs, laptops, net books, mobile and tablet devices, video game consoles, servers, supercomputers and more.

    2. Qt for Embedded Linux
    Qt for Embedded Linux is a C++ framework for GUI and application development for embedded devices. It runs on a variety of processors, usually with Embedded Linux. Qt for Embedded Linux provides the standard Qt API for embedded devices with a lightweight window system.

    3. APPLICATION LANGUAGE C / C++

    ADVANTAGES:
    Low power consumption.
    Easy to implement.
    Robust against conceivable attacks.
    Provides higher security and can protect the message.
    APPLICATIONS:
    It is used in consumer electronics.
    It is used in military, defense and banks.
    REFERENCE:
    1. Datasheets and the user manuals of ARM controller.
    2. Beginning of Linux programming by Neil Matthew, Richard Stones.

  • Minimum Order Quantity: 1 Piece(s)
  • Yes! I am interested

    Automated Real-time Detection Of Potentially Suspicious

    REQUEST CALLBACK

    Automated Real-time Detection Of Potentially Suspicious
    Approx. Rs 10,000 / Piece
    Get Best Quote

    AUTOMATED REAL-TIME DETECTION OF POTENTIALLY SUSPICIOUS BEHAVIOR IN PUBLIC TRANSPORT AREAS
    Domains:

    • Processor Architecture
    • Bist Algorithms
    • Signal Processing
    • Image & Video Processing
    • Communication & Bus Protocols
    • Low Power Vlsi
    • Physical Design (250nm-180nm-90nm-45nm-32nm)
    • Fpga Prototyping, Etc. . . ,

    Languages:

    • Vhdl
    • Verilog Hdl
    • System Verilog
    • H-spice


    Softwares :

    • Xilinx Ise
    • Xilinx Platform Studio
    • Tanner Eda
    • CADENCE
    • Dsch
    • Modelsim Ise
    • Microwind
    • Questasim
    • Pspice

    Hardwares :
    Spartan Series

    • Vertex Series
    • Altera Cyclone Series

    Our Training Features :

    • 100% Outputs With Extension
    • Paper Publishing In International Level
    • Project Training Session Are Conducted By Real-time Instructor With Real-time Examples.
    • Best Project Training Material .
    • State-of-the-art Lab With Required Software For Practicing.
    • ----------------------------------------------------------

    1. An Efficient Implementation of Floating Point Multiplier

    2. High Speed and Low Space Complexity FPGA Based ECC Processor

    3. A blind digital watermarking algorithm based on wavelet transform

    4. A Distributed Canny Edge Detector And Its Implementation on FPGA

    5. Design and Simulation of UART Serial Communication Module Based on VHDL

    6. Design and VLSI implementation of high-performance face-detection engine for mobile applications

    7. Design and Implementation of Area-optimized AES based on FPGA

    8. Design of Low Power And High Speed Configurable Booth Multiplier

    9. Face detection and recognition method based on skin color and depth information

    10. High Speed ASIC Design of Complex Multiplier Using Vedic Mathematics

    11. A New Reversible Design of BCD Adder

    12. Digital Image Authentication from JPEG Headers

    13. Design and Implementation of Low Power Digital FIR Filter based on low power multipliers and adders on xilinx FPGA

    14. Parallel Architecture for Hierarchical Optical Flow Estimation Based on FPGA

    15. A Very Fast and Low Power Carry Select Adder Circuit

    16. A multichannel water making scheme based on DCT-DWT

    17. An Implementation of a 2D FIR Filter Using the Signed-Digit Number System

    18. Design and Characterization of Parallel Prefix Adders using FPGAs

    19. FPGA based FFT Algorithm Implementation in WiMAX Communications System

    20. FPGA Design of AES Core Architecture for Portable Hard Disk

    21. FPGA Implementation of RS232 to Universal serial bus converter

    22. Image Encryption Based On AES Key Expansion

    23. Feature Extraction of Digital Aerial Images by FPGA based implementation of edge detection algorithms

    24. An Efficient Architecture Design for VGA Monitor Controller

    25. Curve Fitting Algorithm FPGA implementation

    26. FPGA Implementation of AES Algorithm

    27. Design of Low Power Column Bypass Multiplier using FPGA

    28. Design of Serial Communication Interface Based on FPGA

    29. Design and Implementation of an FPGA-based Real-Time Face Recognition System

    30. VHDL Design and FPGA Implementation of Weighted Majority Logic Decoders

    31. Low Cost Binary128 Floating-Point FMA Unit Design with SIMD Support

    32. Design Enhancement Of combinational Neural Networks using HDL Based FPGA framework for Pattern Recognition

    33. Efficient VLSI Architecture for Discrete Wavelet Transform

  • Minimum Order Quantity: 1 Piece
  • Yes! I am interested

    Bluetooth Enabled Printer Adapter Using Raspberry Pi

    REQUEST CALLBACK

    Bluetooth Enabled Printer Adapter Using Raspberry Pi
    Approx. Rs 10,000 / Piece(s)
    Get Best Quote

    Bluetooth enabled printer adapter using raspberry pi

    AIM
    The main aim of the project is to build a ”Bluetooth enabled printer using raspberry pi”.
    Existing method:
    The common data printing procedure has to use notebook or desktop computer as a relay medium, first receiving the data from mobile and then sending it to printer using an appropriate printing Method. This is rather cumbersome. This paper proposes a design of a device which directly prints the data stored inside the Mobile without the assistance of a notebook or desktop computer.
    Proposed Method:
    The design compromises Raspberry pi having Debian flavor of Unix. The configured Bluetooth dongle accept file from Mobile and gives to Raspberry Pi. The Printer driver is a program to control a printer that is connected to your system. The CUPs installed on Raspberry Pi do the print job. The disclosed Wi-Fi/USB printing converter can receive data transmitted from a Bluetooth dongle electronic product. The data can be directly sent to a printing device for printing without needing any computer device.
    SOFTWARES USED:
    For implementing this project we are using Linux, Qt for embedded Linux.
    1. LINUX OPERATING SYSTEM (UBUNTU)
    2. QT CREATOR
    3. APLLICATION LANGUAGE C / C++
    ADVANTAGES:
    Easy to implement and low power consumption .
    Easley find out the disconnected modules connected to ARM on run time.
    Less time for trouble shooting
    less cost
    APPLICATIONS:
    Agriculture
    Industries
    Home, Shopping malls.
    REFERENCE:
    1. Datasheets and the user manuals of ARM controller.
    2. Beginning of Linux programming by Neil Matthew, Richard Stones.

  • Minimum Order Quantity: 1 Piece(s)
  • Yes! I am interested

    Carbon Architecture For Uniform(re)configuration And Process

    REQUEST CALLBACK

    Carbon Architecture For Uniform(re)configuration And Process
    Approx. Rs 10,000 / Piece(s)
    Get Best Quote

    Carbon Architecture for Uniform (Re)Configuration and Proces

    AIM:
    The main objective of the project is to design “Architecture for Uniform (Re)Configuration and Processing Over Embedded Sensor and Actuator Networks”.

    EXISTING METHOD:
    Automatic control panel are available in industries for monitoring and controlling the parameters of machines and hence final product. But most of the control panels in industries are wire panels and machines are controlled and monitor by the control room operator using wire network.
    PROPOSED METHOD:
    In the proposed method we overcome the drawback present in existing system by using wireless sensor network. We are designed a system by using ARM 32-bit micro controller which supports different features and algorithms for the development of industrial automation systems. Using ARM controller we can connect all types of sensors and we can connect 8 bit microcontroller based sensor network to ARM controller using different wireless technology called Zigbee. Many open source libraries and tools are available for ARM-linux wireless sensor network development and controlling. Here we can control the devices manually and automatically based on the sensors values from the control room or through the internet. These sensors values are configurable at the run time. We can monitor sensor values and control remotely using internet and webserver.
    TRANSMITTER:
    RECIEVER:
    IMPLEMENTTION:
    For implementing this project we are using Linux and Qt for embedded Linux.
    1. LINUX OPERATING SYSTEM
    The Linux open source operating system, or Linux OS, is a freely distributable, cross-platform operating system based on Unix that can be installed on PCs, laptops, net books, mobile and tablet devices, video game consoles, servers, supercomputers and more.
    2.Qt for Embedded Linux
    Qt for Embedded Linux is a C++ framework for GUI and application development for embedded devices. It runs on a variety of processors, usually with Embedded Linux. Qt for Embedded Linux provides the standard Qt API for embedded devices with a lightweight window system.
    3.APLLICATION LANGUAGE C / C++
    4. KEIL Software:
    Used for 8 bit microcontroller program development for sensors and zigbee wireless network’s.
    ADVANTAGES:
    Low power consumption.
    Easy to implement.
    APPLICATIONS:
    It is used in industrial wireless monitoring and controlliong.
    REFERENCE:
    1. Datasheets and the user manuals of ARM controller.
    2. Beginning of Linux programming by Neil Matthew, Richard Stones.

  • Minimum Order Quantity: 1 Piece(s)
  • Yes! I am interested

    Cognitive Radio Communications In Raspberry

    REQUEST CALLBACK

    Cognitive Radio Communications In Raspberry
    Approx. Rs 10,000 / Piece(s)
    Get Best Quote

    Cognitive Radio Communication’s in Raspberry

    AIM:
    The main objective of the project is to design “Cognitive Radio Communication’s in Raspberry Pi”

    Motivation:

    Raspberry Pi FM Transmitter similarly as Software-defined radio (SDR) is a radio communication system where components that have been typically implemented in hardware like amplifiers modulators, demodulators etc are instead implemented by means of software on a personal computer or embedded systems. Here I am implementing SDR in Raspberry pi which enables transmission/Receiver of signals with the help of General-purpose-input-output pins and with the help of software. While the concept of SDR is not new, the rapidly evolving capabilities of digital electronics render practical many processes which used to be only theoretically possible. We can establish a FM station with the help of Raspberry Pi based on Cognitive Radio communication in which user can easily block other user’s Spectrum. By blocking Spectrum We can easily transmit our signal without any disturbances. Both Transmission and Receiving is possible with raspberry which helps to setup our own communication channel with Cognitive frequency by allocating random frequency.
    In our proposed system, we will give songs as input to Raspberry PI board. And these songs will be transmitted to medium through antenna and the selected song on Raspberry PI will be received by mobile in FM with the desired frequency which has been fixed in Raspberry PI.

    SOFTWARES USED:
    For implementing this project we are using Linux, Qt for embedded Linux.
    1. LINUX OPERATING SYSTEM
    The Linux open source operating system, or Linux OS, is a freely distributable, cross-platform operating system based on Unix that can be installed on PCs, laptops, net books, mobile and tablet devices, video game consoles, servers, supercomputers and more.
    2. Qt for Embedded Linux
    Qt for Embedded Linux is a C++ framework for GUI and application development for embedded devices. It runs on a variety of processors, usually with Embedded Linux. Qt for Embedded Linux provides the standard Qt API for embedded devices with a lightweight window system.
    3. APPLICATION LANGUAGE C / C++

    ADVANTAGES:
    Low cost
    Easy to implement.
    Provides good quality of services.
    APPLICATIONS:
    Low cost FM transmitters.
    REFERENCE:
    1. Datasheets and the user manuals of ARM controller.
    2. Beginning of Linux programming by Neil Matthew, Richard Stones.
  • Minimum Order Quantity: 1 Piece(s)
  • Yes! I am interested

    Image Quality Assessment

    REQUEST CALLBACK

    Image Quality Assessment
    Approx. Rs 10,000
    Get Best Quote

    Image Quality Assessment for Fake Biometric Detection_ Application to Iris, Fingerprint, and Face Recognition

    AIM:
    The main aim of this project is to design “Image Quality Assessment for Fake Biometric Detection: Application to Iris, Fingerprint, and Face Recognition”.
    MOTIVATION:
    Fake biometrics means by using the real images like iris images captured from a printed paper or fingerprint captured from a dummy finger of human identification characteristics create the fake identities like fingerprint, iris on printed paper. Fake user first captures the original identities of the genuine user and then they make the fake sample for authentication. There is no such technology to provide security for fake users.
    Proposed methode:
    In the proposed method, we present a novel software-based fake detection method that can be used in multiple biometric systems to detect different types of fraudulent access attempts. The objective of the proposed system is to enhance the security of biometric recognition frameworks, by adding liveness assessment in a fast, user-friendly, and non-intrusive manner, through the use of image quality assessment.
    SOFTWARES USED:
    For implementing this project we are using Linux, Qt for embedded Linux and open CV library.
    • LINUX OPERATING SYSTEM
    The Linux open source operating system, or Linux OS, is a freely distributable, cross-platform operating system based on Unix that can be installed on PCs, laptops, net books, mobile and tablet devices, video game consoles, servers, supercomputers and more.
    • Qt for Embedded Linux
    Qt for Embedded Linux is a C++ framework for GUI and application development for embedded devices. It runs on a variety of processors, usually with Embedded Linux. Qt for Embedded Linux provides the standard Qt API for embedded devices with a lightweight window system.
    • OPEN CV
    Open CV is an open source computer vision library originally developed by Intel. It is free for commercial and research use under a BSD (Berkeley Software Distribution) license. The library is cross-platform, and runs on Linux, Windows and Mac OS X. It focuses mainly towards real-time image processing, as such, if it finds Intel's Integrated Performance Primitives on the system, it will use these commercial optimized routines to accelerate itself.
    • APLLICATION LANGUAGE C / C++
    ADVANTAGES:
    • Low cost, easy to implement.
    • Low power consumption.

    APPLICATIONS:
    • Used for providing security.
    REFERENCE:
    1. Datasheets and the user manuals of ARM controller.
    2. Beginning of Linux programming by Neil Matthew, Richard Stones.
    Yes! I am interested

    Lossless and Reversible Data Hiding in Encrypted Images

    REQUEST CALLBACK

    Lossless and Reversible Data Hiding in Encrypted Images
    Approx. Rs 10,000 / Piece(s)
    Get Best Quote

    Lossless and Reversible Data Hiding in Encrypted Images with
    Public Key Cryptography
    AIM:
    The main objective of the project is to design “Lossless and Reversible Data Hiding in Encrypted Images with Public Key Cryptography”.
    What is encryption?
    In cryptography, encryption is the process of encoding messages or information in such a way that only authorized parties can read it. Encryption does not of itself prevent interception, but denies the message content to the interceptor.
    PROPOSED METHOD:
    In the modern digital computer world, cryptography play an important role in securing important data. In early days, cryptography was used to protect classified information in government and military applications. Now, with Internet access is a common commodity, government agencies, various industries ranging from Hollywood to corporate, financial institutions and universities make widespread use of cryptography algorithms in everything from storage management to web based online transaction processing, etc.
    In the lossless scheme, the ciphertext pixels are replaced with new values to embed the additional data into several LSB-planes. Then, the embedded data can be directly extracted from the encrypted domain, and the data embedding operation does not affect the decryption of original plaintext image. In the reversible scheme, a preprocessing is employed to shrink the image histo gram before image encryption, so that the modification on encrypted images for data embedding will not cause any pixel oversaturation in plaintext domain

    BLOCK DIAGRAM:




    SOFTWARES USED:
    For implementing this project we are using Linux, Qt for embedded Linux.
    1. LINUX OPERATING SYSTEM
    The Linux open source operating system, or Linux OS, is a freely distributable, cross-platform operating system based on Unix that can be installed on PCs, laptops, net books, mobile and tablet devices, video game consoles, servers, supercomputers and more.

    2. Qt for Embedded Linux
    Qt for Embedded Linux is a C++ framework for GUI and application development for embedded devices. It runs on a variety of processors, usually with Embedded Linux. Qt for Embedded Linux provides the standard Qt API for embedded devices with a lightweight window system.

    3. APPLICATION LANGUAGE C / C++

    ADVANTAGES:
    Low power consumption.
    Easy to implement.
    Robust against conceivable attacks.
    Provides higher security and can protect the message.
    APPLICATIONS:
    It is used in moving data using security algorithms to protect it from malware, hackers.
    It is used in military, defense and banks.
    REFERENCE:
    1. Datasheets and the user manuals of Xilinx zinq processer.
    2. Beginning of Linux programming by Neil Matthew, Richard Stones.
    Yes! I am interested

    On The Application Of Smart Home Technology

    REQUEST CALLBACK

    On The Application Of Smart Home Technology
    Approx. Rs 10,000 / Piece(s)
    Get Best Quote

    On the Application of Smart Home Technology to Prolong Classroom Equipment Lifetime
    AIM:
    The main aim of the project is to design “On the Application of Smart Home Technology to Prolong Classroom Equipment Lifetime”.
    MOTIVATION:
    In existing system, generally in schools and colleges we have to check all the LCD projectors and lights and fans present in each class manually. It will take more time to check all the class rooms in large institutions and needs a lot of man power. And the disadvantage is if people even miss a single room to switch off the lights or fans then it will causes more power consumption and also increasing the global warming effect.
    OBJECTIVE:
    In the proposed system, we propose a smart home technology to do necessary task. In this project, we are placing webcams in all the class rooms for monitoring the devices like lights and fans. When the class room is empty then the staff will remotely turn off the devices and if necessary. This can be done with the help of the arm processor. We are connecting camera for usb slot present in the board and it can monitor the conditions of the class room and sends the data through wifi module. these module will send the data to server for remote monitoring. By observing the data we can control the devices present in the classrooms from the remote location itself.
    Block Diagram:
    SOFTWARES USED:
    For implementing this project we are using Linux, Qt for embedded Linux.
    1. LINUX OPERATING SYSTEM
    The Linux open source operating system, or Linux OS, is a freely distributable, cross-platform operating system based on Unix that can be installed on PCs, laptops, net books, mobile and tablet devices, video game consoles, servers, supercomputers and more.
    2. Qt for Embedded Linux
    Qt for Embedded Linux is a C++ framework for GUI and application development for embedded devices. It runs on a variety of processors, usually with Embedded Linux. Qt for Embedded Linux provides the standard Qt API for embedded devices with a lightweight window system.
    3. APLLICATION LANGUAGE C / C++

    APPLICATIONS:

    Remotely controls all the applications.
    REFERENCE:
    1. Datasheets and the user manuals of ARM controller.
    2. Beginning of Linux programming by Neil Matthew, Richard Stones.

     

  • Minimum Order Quantity: 1 Piece(s)
  • Yes! I am interested

    Sensor Search Techniques For Sensing As Service Architecture

    REQUEST CALLBACK

    Sensor Search Techniques For Sensing As Service Architecture
    Approx. Rs 10,000 / Piece(s)
    Get Best Quote

    Aim: The Main Objective Of The Project Is To Design “sensor Search Techniques For Sensing As Service Architecture For The Internet Of Things”.
    Proposed Method:
    Technologies:
    Wireless sensor network:
    A wireless sensor network (WSN) of spatially distributed autonomous sensors to monitor physical or environmental conditions, such as temperature, LDR, Fire, etc. and to cooperatively pass their data through the network to a main location. The more modern networks are bi-directional, also enabling control of sensor activity. The development of wireless sensor networks was motivated by military applications such as battlefield surveillance; today such networks are used in many industrial and consumer applications, such as industrial process monitoring and control, machine health monitoring.
    Implementation method:
    We are designing advanced embedded system by using wireless sensor network. We are designed a system by using ARM 11 and 8051 which supports different features and algorithms for the development of industrial automation systems. In these project we are using two systems for two-way communication, One system consist of Microcontroller-Atmel (89s52) is used for interfacing sensors to read data,relays for controlling devices and zigbee is used for wireless communication to transfer sensor data to ARM11 controller. Second system consists of ARM11, Ethernet controller and Zigbee module. In second System, Zigbee collects sensor data from first system and sends the data in a shortest path among all the nodes present in the ad-hoc network. And same data will be transferred to Internet through Embedded web-server technology.
    RECIEVER:
    SOFTWARES USED:
    For implementing this project we are using Linux and Qt for embedded Linux.
    1. LINUX OPERATING SYSTEM
    The Linux open source operating system, or Linux OS, is a freely distributable, cross-platform operating system based on Unix that can be installed on PCs, laptops, net books, mobile and tablet devices, video game consoles, servers, supercomputers and more.
    2. Qt for Embedded Linux
    Qt for Embedded Linux is a C++ framework for GUI and application development for embedded devices. It runs on a variety of processors, usually with Embedded Linux. Qt for Embedded Linux provides the standard Qt API for embedded devices with a lightweight window system.
    3. APLLICATION LANGUAGE C / C++
    4. KEIL Software:
    Used for 8 bit microcontroller program development for sensors and zigbee wireless network’s.
    ADVANTAGES:
    Low power consumption.
    Easy to implement.
    APPLICATIONS:
    It is used in industrial wireless monitoring and controlliong.

  • Minimum Order Quantity: 1 Piece(s)
  • Yes! I am interested

     
    X


    Call Us:  +91-8071803116
    Nano Scientific Research Centre Pvt Ltd
    K. Aravind Reddy (Business Director)
    4 & 6th Floor, Siri Estates, Opposite To Karur Vysya Bank, Opposite Lane To R. S. Brothers Ameerpet,
    Hyderabad - 500073, Telangana, India
    Contact via E-mail
    Contact via SMS



    Home  |   Profile   |  Our Services  |  Site Map  |   Contact Us   |   Mobile Site

    © Nano Scientific Research Centre Pvt Ltd. All Rights Reserved (Terms of Use)
    Developed and Managed by IndiaMART InterMESH Limited

    Nano Scientific Research Centre Pvt Ltd